MAX1238EEE+T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Analog to Digital Converters (ADC) play a crucial role in applications from digital signal processing to industrial automation, where digital signals need to be converted from analog signals for further manipulation. MAX1238EEE+T is one of such ADC chips with its own unique features for different applications.

The MAX1238EEE+T is a complete 8-bit successive approximation analog-to-digital converter (ADC) with track-and-hold amplifier (T&HA). It offers high accuracy conversions, with the total unadjusted error of ± 0.5 LSB, and linearity error of 0.015% of FSR. It consists of a low power 8-bit CMOS ADC and a T&HA with adjustable gain and track-and-hold timestamping. The ADC can accept input signals up to ±5 V, enabling use of a single power supply. The T&HA implements a 0 V to5 V input span, with configurable gain of 2, 4, 8, and 16. The total power consumption of MAX1238EEE+T is quite low, 20 mA typical. The simplicity of an external oscillator and the elimination of multiple reference voltages reduce board design greatly.

The output of the MAX1238EEE+T is a parallel 8-bit data word. The track-and-hold amplifier can perform time-stamping at the time of conversion. The T&HA feature provides absolute settling time of 10 μs with 500 kHz input clock frequency and VCC=5 V. This is essential for sampling signals at high speeds with no distortion.

The MAX1238EEE+T can be used for a wide variety of data acquisition and control applications like automotive ECU, handheld medical testers and measuring instruments, DC motor control loops, and others. It is also used in industrial detectors and transformer sensors, as well as in robotic positioning, feedback control, and closed loop tracking systems. It can be used for signal conditioning, signal sampling, and data acquisition in the field of medical imaging, ultrasound, high resolution graphics systems, and data acquisition for remote monitoring.

The MAX1238EEE+T ADC utilizes the successive approximation register (SAR) architecture to convert the analog signal to digital. The SAR architecture has the advantage of fewer components being required than the flash or dual-slope architecture, giving it a much simpler design. The SAR modifies the accuracy of the ADC by increasing the reference voltage or reducing the bit width. The MAX1238EEE+T uses a successive approximation algorithm with a clock rate which adjusts the successive approximation register that contains the estimations of the analog signal. During each clock cycle, the SAR compares the bits of the data word and each time it corrects the estimated analog voltage by a step size of 0.5% of the full scale range. When all bits in the register are equal, the SAR stops and the final 8-bit data word is presented on the output.

In summary, the MAX1238EEE+T analog to digital converter is a complete 8-bit, low power CMOS ADC with track-and-hold amplifier for high-speed applications. It has a total unadjusted error of ± 0.5 LSB, and linearity error of 0.015% of FSR with a total power consumption of just 20 mA. It is ideal for applications such as automotive ECUs, medical testers, measuring instruments, controllers, detectors, and robotic positioning systems. Its SAR architecture makes it an ideal choice for a wide range of data acquisition and control applications.

The specific data is subject to PDF, and the above content is for reference