MAX14970ETP+

Series:	--
Packaging:	Tray
Part Status:	Active
Type:	Buffer, ReDriver
Applications:	eSATA
Input:	--
Output:	--
Data Rate (Max):	6Gbps
Number of Channels:	2
Delay Time:	240ps
Signal Conditioning:	Input Equalization, Output Pre-Emphasis
Voltage - Supply:	3 V ~ 3.6 V
Current - Supply:	70mA
Operating Temperature:	-40°C ~ 85°C
Package / Case:	20-WFQFN Exposed Pad
Supplier Device Package:	20-TQFN (4x4)
Base Part Number:	MAX14970

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

<p>The MAX14970ETP+ intermediate single board computer (SBC) signal buffer, repeater, and splitter are integrated circuits that are designed to extend the range of an SBC’s operating environment. This type of IC supports signal buffering, signal boosting, data duplication, and signal splitting. Signals received by the input of the IC are amplified, split, and buffered until the output signal reaches its destination, allowing reliable communication at low power consumption.</p><p>The MAX14970ETP+ provides a single-ended open-collector driver that allows for the transmission of signals from one board to another. This means that the signal can be sent from one IC to another without having to worry about signal loss or distortion.</p><p>The MAX14970ETP+ is also designed to decrease the noise susceptibility of the SBC by amplifying the signal and increasing the signal-to-noise ratio. The low-noise nature of the IC is critical to ensuring the quality of data transmission in embedded and hard-to-reach applications.</p><p>In order to maximize the performance of the MAX14970ETP+ ICs, they must be used in conjunction with other components, such as connection/jumper blocks, diodes and transistors. By using these components, it is possible to construct a system that can perform data transmission without the need for additional hardware.</p><p>The MAX14970ETP+ can also be used to provide data redundancy in the form of a dedicated splitter circuit. This feature can be used to distribute data in a cluster environment without the need for an external hardware splitter. The redundant data can be used to ensure the proper functioning of the system in the event that one of the nodes fails.</p><p>The MAX14970ETP+ supports both parallel and serial communication. Depending on the application, there are two versions of the IC available. The parallel communication version provides two channels while the serial communication version has four independent channels. The serial communication version has a maximum operating frequency of 4GHz, allowing for data throughput of up to 8Gbps.</p><p>The MAX14970ETP+ is designed to help make SBC systems more reliable. It is capable of providing signal buffering, signal boosting, data duplicating, and signal splitting. It can also provide data redundancy through its dedicated splitter circuit, increasing system reliability in a distributed environment. Also, by using other components in conjunction with the IC, it is possible to control the flow of data without additional hardware. </p>

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description