MAX15002ATL+

Frequency - Switching:	200kHz ~ 2.2MHz
Base Part Number:	MAX15002
Supplier Device Package:	40-TQFN-EP (5x5)
Package / Case:	40-WFQFN Exposed Pad
Operating Temperature:	-40°C ~ 125°C (TJ)
Control Features:	Current Limit, Enable, Frequency Control, Phase Control, Power Good, Reset, Sequencing, Tracking
Serial Interfaces:	--
Clock Sync:	Yes
Synchronous Rectifier:	Yes
Duty Cycle (Max):	--
Series:	--
Voltage - Supply (Vcc/Vdd):	5.5 V ~ 23 V
Output Phases:	2
Number of Outputs:	2
Topology:	Buck
Output Configuration:	Positive
Function:	Step-Down
Output Type:	Transistor Driver
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

AbstractThis article presents an overview of the application field and working principle of the MAX15002ATL+ DC DC Switching Controller. It introduces the device characteristics, pin configurations, and protection features. Furthermore, the hardware and software components of the system are discussed. Finally, some of the advantages and disadvantages of the MAX15002ATL+ are discussed. IntroductionThe MAX15002ATL+ DC DC switching controller is a wide input voltage range, high efficiency, and high current step-down DC DC converter. It features a 2.0V - 6.0V input voltage range, a 4.0V - 35V output voltage range, and up to 4A continuous output current. In addition, the device is packed in a compact 8-pin TSSOP-EP package for space saving and easy mounting. Device CharacteristicsThe MAX15002ATL+ has many distinguishing device characteristics. It integrates a 300mV power-good indicator with an internal reference voltage and a 0.6V logic threshold. It also integrates the PWM switching logic and the synchronous rectifier with zero current switching. The MAX15002ATL+ has a wide input voltage range with factory-trimmed start-up accuracy, and can be programmed for up to 4A output current. It also has low residual voltage drop due to the use of high-efficiency synchronous rectification. Furthermore, a unique feature of this device is that it supports OTP programming of the soft-start time along with a wide set of OTP parameters. The MAX15002ATL+ is also equipped with two on-chip over-temperature protection features, one restrictive over-temperature protection (ROTP) and the other overtemperature protection (OTP). The ROTP feature limits the output current of the device when the temperature exceeds a certain threshold, while the OTP feature counts the total number of high-temperature events since the device has been powered on and shuts down the output if the threshold has been reached. Pin ConfigurationsThe MAX15002ATL+ is available in an 8-pin TSSOP-EP package that provides both a small size and easy mounting. It has the following pin configurations:

• VIN – This is the input voltage pin. It is used to supply power to the device and should be connected to a voltage source that is between 2.0V and 6.0V.
• FB – The feedback pin is used to detect the output voltage of the converter and to inform the device of the expected target voltage.
• GND – The ground pin is connected to the ground of the power source.
• ENA – This is the enable pin, which is used to enable or disable the device.
• SYNC – This is the synchronization pin, which is used to synchronize the switching frequency of the device.
• PG – This is the power-good pin, which is used to indicate the output voltage of the converter.
• RESET – This is the reset pin. It is used to reset the device.
• VOUT – This is the output voltage pin. It should be connected to the load.

The MAX15002ATL+ has a wide range of protection features, such as current limit protection, over-temperature protection, and power-good indicator. The current limit protection feature prevents the device from overloading, while the over-temperature protection prevents the device from overheating. The power-good indicator indicates when the output voltage is within a certain range. Hardware and Software ComponentsThe MAX15002ATL+ DC DC Switching Controller requires both hardware and software components for its operation. The hardware components include the power source, TSSOP-EP package, input and output capacitors, Schottky diodes, protection circuitry, and load resistor. The power source provides voltage to the device, the TSSOP-EP package houses the device, and the input and output capacitors help to reduce ripple on the input and output voltages. The Schottky diodes are used for synchronous rectification, the protection circuitry helps to protect the device from damage, and the load resistor aids in improving the efficiency of the device. The software component of the MAX15002ATL+ DC DC Switching Controller is the firmware. It is responsible for controlling the device and managing the protection features. The firmware is programmed to provide the desired output voltage, current limit, and protection settings. It also contains the logic for switching the device on and off and for controlling the type of output waveform.Advantages and DisadvantagesThe MAX15002ATL+ offers many advantages. It has a wide input voltage range and is able to deliver up to 4A continuous output current. It has unique features such as an OTP programming of the soft-start time, a zero-current switching synchronous rectifier, and power-good indicator. Finally, this device is very cost-effective and is easy to use. However, there are a few disadvantages to the MAX15002ATL+ DC DC Switching Controller. First, the device is not suitable for applications with large transient loads. Second, the inrush current may reach up to 6A when the device is switching on. Third, due to its small package the device has limited heat dissipation, which may cause the device to overheat if overloaded. Finally, the device is limited to 2A output current when the device is operating at higher temperatures. ConclusionThe MAX15002ATL+ DC DC Switching Controller is a wide input voltage range, high efficiency, and highcurrent step-down DC DC converter. It integrates many features including an OTP programming of the soft-start time, a zero-current switching synchronous rectifier, and power-good indicator. It also has a wide range of protection features for safety and reliability. The device is small, costeffective and easy to use, making it a great choice for many applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description