MAX154BCAG+T

Number of A/D Converters:	1
Base Part Number:	MAX154
Supplier Device Package:	24-SSOP
Package / Case:	24-SSOP (0.209", 5.30mm Width)
Operating Temperature:	0°C ~ 70°C
Features:	Selectable Address
Voltage - Supply, Digital:	5V
Voltage - Supply, Analog:	5V
Reference Type:	Internal
Architecture:	Flash
Series:	--
Ratio - S/H:ADC:	1:1
Configuration:	MUX-S/H-ADC
Data Interface:	Parallel
Input Type:	Single Ended
Number of Inputs:	4
Sampling Rate (Per Second):	400k
Number of Bits:	8
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

MAX154BCAG+T Analog to Digital Converters (ADC) is a premier device for data acquisition applications that require precision analog to digital conversions of analogue signals. It is primarily intended for low power, battery-operated systems and can operate with different voltage levels ranging from a single 2.7V supply to a dual 5V supply. The unique combination of precision and low power makes the ADC an attractive choice for a variety of high performance, low power applications.The MAX154BCAG+T ADC utilizes a delta-sigma conversion technique to convert the analogue input signals into digital code with 12-bits of resolution and a 0.4LSB (least significant bit) INL/DNL (integral nonlinearity/differential nonlinearity) accuracy. This allows the ADC to achieve a high degree of accuracy and high linearity in its analog to digital conversion. The ADC also features a low noise floor of 5nV/ŤHz, making it ideal for high-precision applications in which the noise level of the input signals is very low.In order to make use of the ADC’s features, the device requires external components, such as resistors and capacitors, to complete the analog to digital conversion process. The ADC consists of four main components: the voltage reference, sample and hold circuit, charge pump, and analog-to-digital converter. The sample and hold circuit charges the input signal, which is then charged by the charge pump and sent to the ADC for conversion. The reference voltage is selected and configured by an external resistor.Other features of the MAX154BCAG+T ADC include shutdown mode, parallel bus interface, fast conversion (62.5kHz to 500kHz), automatic offset and gain calibration, and fast charge pump operation. It has a wide input range of +0.2V to +4V, is available in 8-pin DIP, QFN/TDIP, TSSOP/U-LCC, and 10-pin QFN/U-LCC packages, and is operable over a wide temperature range (-40C to +105C). The ADC\'s extremely low power consumption, small size, and excellent performance make it an ideal choice for low power applications.Maxim\'s MAX154BCAG+T ADC is an excellent choice for a wide range of data acquisition applications where high accuracy, low power consumption, and a small form factor are key design considerations. The ADC\'s low noise floor of 5nV/ŤHz and 12-bits of resolution make it ideal for high precision applications such as portable medical sensors, industrial and automotive control systems, and military/aerospace applications. It is also suitable for many other applications such as digital audio, simulation and soft sensing, and radiofrequency. The small size, low power consumption, and high precision makes the MAX154BCAG+T ADC a premier choice for many data acquisition applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description