MAX158BEPI+

Number of A/D Converters:	1
Base Part Number:	MAX158
Supplier Device Package:	28-PDIP
Package / Case:	28-DIP (0.600", 15.24mm)
Operating Temperature:	-40°C ~ 85°C
Features:	Selectable Address
Voltage - Supply, Digital:	5V
Voltage - Supply, Analog:	5V
Reference Type:	Internal
Architecture:	Flash
Series:	--
Ratio - S/H:ADC:	1:1
Configuration:	MUX-S/H-ADC
Data Interface:	Parallel
Input Type:	Single Ended
Number of Inputs:	8
Sampling Rate (Per Second):	400k
Number of Bits:	8
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to MAX158BEPI+The MAX158BEPI+ is an analog to digital converter (ADC) designed for data acquisition applications. It is an 8-bit serial converter with an onboard programmable gain amplifier (PGA). It supports up to 8 channels of high-accuracy, wide bandwidth analog-to-digital conversion. The MAX158BEPI+ has a dedicated serial port that enables communication with a single microcontroller or microprocessor, eliminating the need for external communication buses and allowing for more efficient data transfer and storage.The MAX158BEPI+ provides several advantages over competing devices. These include a low-power, low-noise design; a wide input voltage range (-2V to +2V); a wide range of output data rates; and an on-board programmable gain amplifier (PGA) for improved signal performance. Additionally, the MAX158BEPI+ supports a variety of digital signal processing algorithms for improved data throughput.Application FieldThe MAX158BEPI+ can be used in a variety of data acquisition applications. It is designed for applications such as industrial sensor measurements, robotics, medical device monitoring, and test instrumentation. It can be used to measure physical parameters such as temperature, pressure, and acceleration, as well as electrical parameters such as voltage and current.The versatile nature of the MAX158BEPI+ allows it to be used in a range of environments, including harsh, noisy industrial environments and precise professional applications. It is suitable for use in low-power, battery-powered applications, and can also be used in portable, handheld devices.Working PrincipleThe MAX158BEPI+ converts analog signals into digital values by sampling the signal and processing it through an analog-to-digital converter (ADC). The signal is then processed by a programmable gain amplifier (PGA) and fed into the ADC for conversion. The ADC then converts the signal into a digital value, which is then converted into an output format specified by the customer.The MAX158BEPI+ is capable of sampling signals at up to 8x the speed of competing ADC devices, allowing it to achieve improved accuracy and throughput. Additionally, the onboard PGA allows input signals to be amplified or attenuated in order to achieve lower noise or greater accuracy. The MAX158BEPI+ is designed for use in data acquisition applications, and is programmed and operated by means of various registers. These registers are accessible via serial communication, allowing for easy setup and configuration of the ADC for specific applications.ConclusionThe MAX158BEPI+ is a high performance 8-bit analog to digital converter for data acquisition applications. It offers a low power, low noise design with wide input and output ranges, as well as programmable gain amplification. The MAX158BEPI+ features versatile programming options, allowing it to be used in a variety of environments and applications. With its high-speed sampling capabilities and low power consumption, the MAX158BEPI+ is well-suited for battery-powered devices and professional applications alike.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description