MAX16001CTE+

Series:	--
Packaging:	Tube
Part Status:	Active
Type:	Multi-Voltage Supervisor
Number of Voltages Monitored:	4
Output:	Open Drain or Open Collector
Reset:	Active Low
Reset Timeout:	Adjustable/Selectable
Voltage - Threshold:	1.8V, 2.5V, Adj, Adj
Operating Temperature:	-40°C ~ 125°C (TA)
Mounting Type:	Surface Mount
Package / Case:	16-WQFN Exposed Pad
Supplier Device Package:	16-TQFN (4x4)
Base Part Number:	MAX16001

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The MAX16001CTE+ is a device from Maxim Integrated and is part of its PMIC (Power Management Integrated Circuit) and Supervisors category of devices. It is specifically a dual-channel supervisor specifically designed for monitoring node voltage levels in system-on-chip (SoC) architectures. It has a variety of system applications including battery-powered devices, current monitoring, over and under-voltage monitoring, and brown-out detections. The MAX16001CTE+ typically works in conjunction with AC/DC power-supply and system reset circuitry.

Application Field

The MAX16001CTE+ is designed for the 7-microampere to 500-microampere, 1.6-volt to 3.3-volt range of voltage levels. This range of voltage levels is suitable for a wide range of applications such as SoC designs, battery-powered devices, solid-state drives (SSDs) and various other battery-powered applications. It is also used in systems that needs over-voltage, under-voltage and brown-out detection. In terms of features, the device has two independent comparator channels that are used to monitor two separate voltage levels. It also includes an alarm output signal which is used to indicate any fault or failure on any of the monitored signals.The device has an SPI (Serial Peripheral Interface) mode for programmable voltage monitoring, as well as an I2C (Inter Integrated Circuit) mode for a flexible and efficient interface. Its easy to use and can be integrated in any system design.

Working Principle

The MAX16001CTE+ operates by monitoring two separate voltage levels within a 7-microampere to 500-microampere, 1.6-volt to 3.3-volt range. It monitors the two separate voltages in order to detect any faults or abnormal operation. The device then uses an alarm output signal that indicate any issues on the monitored voltages with a programmable threshold.In terms of working mechanism, the device uses two comparator channels, one for each voltage being monitored. The first comparator channel is used to trigger a high alarm if the voltage level rises above the programmed threshold and the other comparator channel is used to trigger a low alarm if the voltage level drops below the programmed threshold. The device also uses an SPI (Serial Peripheral Interface) and I2C (Inter Integrated Circuit) for a more easy to use and efficient interface. The SPI interface is programmed with the required voltage so that any fault or abnormal operation will be detected with ease. To receive the alarm output, the external ports of the device must be connected to a suitable MCU (Microcontroller Unit). The MCU will then take the responsibility of managing the output of the device and subsequently reacting to any fault or abnormal operation.

Conclusion

The MAX16001CTE+ is a device from Maxim Integrated and is part of its PMIC (Power Management Integrated Circuit) and Supervisors category of devices. It is a powerful device specifically designed for monitoring node voltage levels with a range of 7-microampere to 500-microampere, 1.6-volt to 3.3-volt range. It is suitable for a wide range of applications such as SoC designs, battery-powered devices, solid-state drives (SSDs) and various other battery-powered applications. It is a device that has two comparator channels for monitoring two separate voltage levels and has an alarm output signal which is used to indicate any fault or failure on any of the monitored signals. In terms of interfacing, it has SPI (Serial Peripheral Interface) mode for programmable voltage monitoring, as well as an I2C (Inter Integrated Circuit) mode for a flexible and efficient interface. Overall, the MAX16001CTE+ device is a powerful and versatile device that is suitable for many applications and makes it an ideal choice for many system designs.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description