MAX177CNG+

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Analog to Digital Converters (ADCs) are electronic devices that convert continuous signals that vary in amplitude over time into a digital representation. MAX177CNG+ is one of them and it is a 14-bit voltageoutput analog-to-digital converter (ADC). It features a maximum sampling rate of 280 kSPS, a differential input range from -2.5 V to +2.5 V, and a wide supply voltage range from 2.7V to 5.25V. It contains a low-noise, precision sample-and-hold, a high-speed Amplifier with excellent input noise characteristics and a 14-bit 70MHz SAR. By combining these functional blocks, MAX177CNG+ can achieve the best possible performance when it comes to accuracy and power savings.

MAX177CNG+\'s application field involves all processes where analog information needs to be converted into digital data. For example, in digital consumer electronics, such as mobile phones and tablets, MAX177CNG+ is used to measure the battery voltage, screen touch, camera and microphone signals. In automotive systems, MAX177CNG+ can be used to measure various sensors such as throttle position and speed. In robotics, MAX177CNG+ can be used to measure joint angles and detect obstacles nearby. In industrial processes, MAX177CNG+ can be used to measure temperature and pressure. This device can also be embedded in portable medical devices for measurement of ECG and EEG signals. When it comes to power measurement, this AD converter can be used for accuracy, stability and response time.

MAX177CNG+\'s working principle is based on a successive approximation register (SAR) architecture, also known as Gradual Conversion or Incremental Conversion. The SAR utilizes an internal capacitor array along with a comparator. The idea of working is that it samples the input signal and then sequentially approximates its digital step size until each bit of the digital code is obtained. The SAR starts to compare the sampling voltage with a series of reference voltages beginning at the lowest digital code (all bits equal to 0). If the sampling voltage is higher than the reference voltage, the bit is set to 1 and the SAR proceeds to the next reference voltage. If not, the bit is set to 0 and the SAR continues the comparison with the next reference voltage. This process is repeated until the full digital code is obtained. Finally, the digital code is converted to a voltage of the same value as the sampling voltage.

MAX177CNG+ is an advanced ADC that offers a high performance-to-power ratio and accuracy. Its innovative architecture combines the low power consumption and overall low power loss of SAR architecture with Linear Structure, resulting in the best performance of all four major ADC architectures. With its high sampling rate and low power consumption, this solution is ideal for applications where signal accuracy and high-speed conversion are required.

To summarize, MAX177CNG+ is a 14-bit voltage output analog-to-digital converter (ADC) that contains a low-noise, precision sample-and-hold, a high-speed Amplifier with excellent input noise characteristics and a 14-bit 70MHz SAR. It is popularly used for digital consumer electronics, automotive systems, robotics, industrial processes, and power measurement. It works based on a successive approximation register (SAR) architecture. Because of its high sampling rate and low power consumption, it is the ideal solution for applications where signal accuracy and high-speed conversion are required.

The specific data is subject to PDF, and the above content is for reference