MAX207EEWG

Series:	--
Packaging:	Tube
Part Status:	Obsolete
Type:	Transceiver
Protocol:	RS232
Number of Drivers/Receivers:	5/3
Duplex:	Full
Receiver Hysteresis:	500mV
Data Rate:	120Kbps
Voltage - Supply:	4.75 V ~ 5.25 V
Operating Temperature:	-40°C ~ 85°C
Mounting Type:	Surface Mount
Package / Case:	24-SOIC (0.295", 7.50mm Width)
Supplier Device Package:	24-SOIC
Base Part Number:	MAX207

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MAX207EEWG is an integrated interface for general data transmission. It is classified into the interface category of drivers, receivers and transceivers, and is ideal for applications that involve transmitting data in both directions over short distances. The device is used in consumer electronics such as mobile phones, MP3 players, video cameras and digital cameras, as well as industrial applications like factory automation and motor control.The device is based on Maxim’s SMBus single-wire protocol, which is used to perform bidirectional communication. The protocol uses a single-wire connection to transfer data between two separate units, such as a microcontroller and a memory device. The device has a built-in differential line driver and receiver, providing the interface’s maximum signaling rate of 200Kbps. The device is also capable of generating and recognizing SMBus alert interrupts, allowing for power management applications.The device provides two different modes of operation: normal mode and alert mode. In normal mode, data can be transferred from the master to the slave, and from the slave to the master over an SMBus connection. The transmitted data is organized into a continuous stream of logic levels that is interpreted by two internal logic comparators. In alert mode, an external interrupt signal can be used by the device to trigger an SMBus alert. The alert signal is sent from the master to the slave, and is then acknowledged by the slave or a peripheral device.The MAX207EEWG also has a built-in level shifter, allowing the device to operate over a wide range of supply voltages. The device can be powered from 2.7V to 5.5V, providing the flexibility to accommodate various power conditions.The device is a full-duplex interface, which allows data to be transmitted and received simultaneously. The device also supports up to 64 bytes of transmit and 63 bytes of receive data. The device is also capable of working with up to 32 slave devices.In terms of physical characteristics, the MAX207EEWG has a maximum supply current of 1 mA, a maximum operating temperature of +85°C, and a maximum package size of 8-Pin SSOP. The device is compliant with the industry standard for SMBus protocol and is certified for use in automotive and other mission-critical applications.To obtain the best performance from the device, the user needs to follow the recommended layout for board design. The MAX207EEWG’s recommended digital layout consists of a single photodiode and two separate AC digital lines. The photodiode monitors the output of the LEDs while the AC digital lines control the direction of the data. Proper layout can also help minimize the device’s power consumption and EMI emissions.Overall, the MAX207EEWG is an advanced interface solution for short-range data communication. It is highly suitable for applications that require wireless, shared and serial communication. The device’s wide supply voltage range, multiple modes of operation, and support for up to 32 slaves makes it the perfect choice for any industrial or consumer electronics application.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description