MAX236MRG

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MAX236MRG is an IC (Integrated Circuit) from Maxim Integrated and belongs to the family of transceivers which are used for interfacing and communications in data processing systems. This IC is used for serial and parallel data transfer applications. It is an 8-bit differential bus transceiver with three-state outputs that can be used for both transmitting and receiving.The MAX236MRG is an excellent choice for interfacing between the TTL/CMOS logic and the general-purpose differential line driver/receiver. It has an output voltage range of -18V to +18V with a maximum data rate of 36 Mbps. The IC also has low power consumption with a typical power supply of 3.3V or 5V. It is used in various applications such as network broadcast receivers, bi-directional data transmission, logic translators, etc. The MAX236MRG has two separate differential input lines named A and B which are used to send or receive data between two components. The IC also has a control signal named C which is used to select the type of data transmission. When the signal C is high, the IC will enter the transmission (Tx) mode and the data from line A will be transmitted to line B and vice versa. When signal C is low, the IC will enter the receive (Rx) mode and the data from line A will be received to line B and vice versa.The MAX236MRG also has four logic inputs called E (enable), L (latch), H (hold) and X (reset). The E pin is used to enable the transceiver and the L pin is used to latch the data. The H pin is used to hold or suspend transmission of data. The X pin is used to reset the IC so that it can enter the Rx mode.The MAX236MRG also has a number of built-in safety features such as thermal shutdown, open-circuit protection and bus hold. Thermal shutdown detects an over-temperature condition and shuts down the IC to prevent damage. Open-circuit protection prevents data loss due to an open bus line. And bus hold prevents data loss due to an inactive bus line. In conclusion, the MAX236MRG is an 8-bit differential bus transceiver that can be used for both transmitting and receiving. It is used for serial and parallel data transfer applications and has a number of safety features to prevent damage and data loss. It is an excellent choice for interfacing between the TTL/CMOS logic and the general-purpose differential line driver/receiver.

The specific data is subject to PDF, and the above content is for reference