MAX241EAI+

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

MAX241EAI is an 8-channel line receiver and transmitter with low power dissipation and wide operating temperature range. It is mainly used in digital signal interface applications such as microprocessor and computer systems. The receiver operates from a single 5 Volt supply and is pin-compatible with National Semiconductor\'s DSCC-232 (V.22bis) and Signetics\' SmartComm line receiver.

The MAX241EAI is a highly integrated line receiver/transceiver with an operating voltage range of 3 to 12 Volts. It is capable of driving low-power loads and has low power dissipation. The receiver has a maximum noise rejection of -6.5 dB and an upper cutoff frequency of 6.5 kHz. It is designed to detect signals from 0.8V peak-to-peak up to 3V peak-to-peak. It features a linearity accuracy of 1.5% and provides a low distortion level of 0.03%.

The MAX241EAI has an active-low enable line and a low-power standby mode. The standby mode is useful for saving power when the device is not in use. It is also capable of handling power-on reset protection, eliminating the need for external reset circuitry. In addition, the device includes a temperature-compensated Schmitt trigger for increased stability.

The MAX241EAI has two different types of long-haul interfaces. The receiver features a maximum data rate of 115.2kbps with a maximum distance of 20km. The transmitter is able to transmit data over distances up to 20km with a data rate of up to 230.4kbps. The devices are designed for use in long distance telecommunication systems and are suitable for use in both industrial and commercial applications.

The MAX241EAI is designed to enable full-duplex communication with asynchronous or synchronous serial data rates. It is optimized for use in space-limited embedded systems and can be used as a stand-alone interface or as part of an integrated system. The device supports five different serial modes, including: asynchronous serial, quadrature circuit, serial asynchronous synchronous, and RS-422 modes. It supports up to four different control signals, two of which can be used to transmit control data in parallel with the asynchronous data.

The MAX241EAI is capable of handling bidirectional data flow with a maximum transfer rate of 230.4kbps. It incorporates a wide operating temperature range, from -20°C to +85°C, and features a wide input range that supports both TTL and CMOS logic levels. The device also offers an interrupt function that can be used to indicate an incoming data packet or an incoming interrupt request from the host processor. The receiver also features several error detection and correction features, including parity and cyclic redundancy check.

The MAX241EAI is an ideal solution for digital signal interface applications, providing both high speed and low power dissipation. With its wide operating temperature range and high-speed data transfer capabilities, the device is suitable for use in both consumer and industrial applications. The receiver\'s low power consumption makes it ideal for use in battery powered applications and it is pin-compatible with other similar devices, making it easy to replace existing parts without reworking the circuit board.

The specific data is subject to PDF, and the above content is for reference