MAX251ESD

Series:	--
Packaging:	Tube
Part Status:	Active
Type:	Transceiver
Protocol:	RS232
Number of Drivers/Receivers:	2/2
Duplex:	Full
Receiver Hysteresis:	600mV
Data Rate:	--
Voltage - Supply:	4.5 V ~ 5.5 V
Operating Temperature:	-40°C ~ 85°C
Mounting Type:	Surface Mount
Package / Case:	14-SOIC (0.154", 3.90mm Width)
Supplier Device Package:	14-SOIC
Base Part Number:	MAX251

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

MAX251ESD Interface - Drivers, Receivers, TransceiversThe MAX251ESD is an isolator for industrial automation, especially for communications between different systems. It is an interface IC designed for reliable communications and is suitable for applications requiring reliable data transfer over long distances.The MAX251ESD is a small, low-power, and highly reliable interface IC used to provide electrical isolation between high-speed interfaces of various kinds. This device is used to protect signal integrity and to prevent against signal noise and interference, which is a common issue that arises with long-distance signal transmission. This IC allows high-speed transmission of data signals between separate systems with the help of optical isolation.The MAX251ESD combines an opto-isolator with an integrated power-on reset, short-circuit protection, hot-swap capability and low power consumption. This device is used to provide galvanic isolation of the data lines while at the same time providing a buffered optical transmission of data. This isolation prevents unwanted electrical coupling of signals between different systems, as can sometimes occur with long cables.To ensure reliable operation, the MAX251ESD device contains several safety features, such as a power-on reset, voltage clamping, fail-safe protection and open-drain outputs. The voltage clamps prevent unintentional data transmission in case of an unexpected overvoltage situation, while the open-drain outputs provide fault protection in the event of a device failure.The MAX251ESD is a fully compliant device with the USB-IF standard, which meets the USB2.0 High Speed Standard. As such, it is qualified for USB applications up to 480 Mbps. It is also UL approved and CSA compliant, meaning that it provides a safe and reliable solution for industrial applications.The MAX251ESD allows for data transmission rates up to 500 Mbps depending on application conditions. This high speed data transmission rate allows for fast communication between multiple systems.The device’s operation can be broken down into the following steps:1. The MAX251ESD receives the input signal from the transmitting system.2. The IC performs a conversion of the signal into an optical format suitable for transmission.3. The optical signal is then transmitted across the optical link between the two systems, providing electrical isolation.4. The receiving system converts the transmitted optical signal back into an electronic format and performs the required data processing or other operations.The MAX251ESD is a reliable and cost effective solution that can be used to provide galvanic isolation between different systems, meaning it is highly suitable for industrial and medical applications. Additionally, the device is compliant with various EMI and ESD standards, ensuring the safety of both the system and the user.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description