MAX268AEWG

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Active Filters are a type of analog filter circuits which are used to remove unwanted frequencies from a signal. MAX268AEWG is an active filter chip developed by Maxim Integrated, which works in a wide input voltage range of 3.2V to 18V. It has very good EMI noise immunity, low power consumption and low output off-set voltage. This makes it suitable for industrial and medical applications.

The MAX268AEWG application field includes but not limited to, industrial communication interface filters, industrial sensors, data acquisition systems, photovoltaics, robotics, drones, IoT and industrial processes. This chip can be used in different types of applications where there is requirement of high attenuation even in flat frequency domain.

MAX268AEWG is a two-stage IIR active filter chip, which can be used to filter out both high-frequency and low-frequency components. This chip uses a combination of both active and passive components to filter out the unwanted signals from a given input signal. It has three pins, two for the input voltage and one for the output voltage. The input voltage is converted to a current which is then used for active filtering. The output voltage is obtained by the closed-loop feedback loop.

The three main components of the MAX268AEWG are the differential amplifier, resistor and capacitor. The differential amplifier is used to amplify the input signal and change it to a current. This current is then used for the active filtering process. The resistor and capacitor are then used to form the filter network and to adjust the cutoff frequency. The resistor and capacitor are selected depending on the application and the required frequency response of the filter.

The difference between MAX268AEWG and other active filters is that it works in wide ranges of input voltage. It can tolerate environment interference and it is very low power consuming compared to other active filter chips. The output of this chip is also very stable, which makes it suitable for industrial and medical applications. Overall, this chip is a great choice for filtering out noise and unwanted frequencies from a given input signal.

In conclusion, MAX268AEWG is an active filter chip developed by Maxim Integrated. It is used to remove unwanted frequencies from a given input signal. It has a wide input voltage range of 3.2V to 18V, which makes it suitable for industrial and medical applications. It has adjustable cutoff frequencies, low power consumption and stable output voltage. This makes it a great choice for industrial and medical applications.

The specific data is subject to PDF, and the above content is for reference