MAX3086ESD+T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MAX3086ESD+T is a microcontroller-compatible I2C serial EEPROM that features a latch-based microcontroller port for applications that require addition address locations for I/O expansion. It is designed to provide a simple, low cost solution for serial communication between host microcontrollers and peripherals. The device is ideal for applications including printers, displays, indicators, transducers, and memory interfaces.
The MAX3086ESD+T is a low-cost serial communication interface that can be used to connect a host microcontroller or microcomputer directly to a variety of input/output (I/O) devices. It provides a means for serial communication between the microcontroller and peripherals, such as sensors, actuators, and memories. The device is designed to be compatible with most popular microcontrollers, minimizing microcontroller development time.
The device is a one-wire serial interface that supports address scanning, multi-master support, up to 500 kHz fast mode operation, and suitable I/O expansion options. It also includes a 2-pin interface select pin and 4-bit binary ID that can be recombined to provide a unique ID for each device in a system. The use of the ID field allows multiple devices of the same type to be connected in parallel to provide distributed control of a system.
The MAX3086ESD+T operates in one of four modes, depending on settings of the control pins; normal mode, interrupt mode, alert mode and BCM (Bi-directional Communication Mode). In normal mode, the microcontroller initiates a read or write from one device at a time. In interrupt mode, the device interrupts the controller when any of its inputs change state. In alert mode, the device sends out an alarm signal when a certain condition is detected. In BCM mode, data can be exchanged in both directions simultaneously.The MAX3086ESD+T can be used in a wide range of applications, such as consumer electronics, office automation, communications, industrial control, vehicle infotainment, and many others. The device is particularly well suited for applications requiring I/O expansion, such as data logging and remote sensing. The device is designed to be power efficient, making it an ideal solution for applications where low power consumption is critical.The MAX3086ESD+T is a low voltage device, operating from 1.62V to 4.2V and is software-compatible with most popular microcontrollers. The device is pin compatible with the MAX3086, but with added flexibility. It includes a latch-based microcontroller port allowing addition address locations, and is capable of bus speed up to 500 kHz, allowing faster data transfer rates. The device also includes an advanced on-chip temperature sensor and an I2C address select pin, allowing the device to be programmed for a specific application.The MAX3086ESD+T is designed for low power and high noise immunity, reducing system power consumption and improving signal integrity. The device is capable of operating in both open-drain and push-pull modes and uses advanced logic to reduce current consumption. The device is also equipped with power glitch protection, protecting the system against power surges caused by ESD, EMI and other system glitches.In conclusion, the MAX3086ESD+T is an advanced one-wire serial EEPROM interface suitable for applications in a wide range of industries, including consumer electronics, office automation, communications, industrial control, and more. The device is power efficient, low voltage, and has an advanced latched microcontroller port for additional I/O expansion. With its advanced features and robust design, the MAX3086ESD+T is ideal for applications requiring a simple and reliable serial communication solution.

The specific data is subject to PDF, and the above content is for reference