MAX3238IPWRE4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Interface - Drivers, Receivers, Transceivers

The MAX3238IPWRE4 is a family of high-speed, low power, true RS-485 transceivers. It is enhanced with auto-shutdown and line-fault detection circuitry, allowing it to be used in high-speed data transmission and reception applications where bus off conditions are a concern. The unique architecture of these devices strengthens its reliability by reducing noise and cross-talk components, while the low-power operating mode allows them to be used in battery-powered applications with or without a PCB or carrier board.

Application Field

The MAX3238IPWRE4 is ideal for point-to-point and multi-drop (daisy chain) RS-485 applications where data transmission and reception must be reliable and secure. Typical applications include industrial automation, home automation, building automation, medical instrumentation, and automotive applications. Due to its low power operation, the MAX3238IPWRE4 is well suited for power-sensitive applications.

Working Principle

The MAX3238IPWRE4 works by using a differential signaling system. Differential signaling means that two signals, usually referred to as A and B, are sent on two separate channels. The receiver interprets the difference in the two signals. A is the logical 0 and B is the logical 1. The two signals remain in perfect synchronization and the receiver interprets the difference between them. This increases the signal integrity since noise and interference on the cable will affect both A and B in the same way and be rejected by the receiver.

The MAX3238IPWRE4 also includes auto-shutdown, line fault detection, and short circuit protection. Auto-shutdown is a feature that will reduce current consumption when transmiting is not necessary. If a line fault is detected, the device will assert a flag and stop itself in order to prevent data loss or corruption. Additionally, the MAX3238IPWRE4 will sense a short circuit on any of its ports and take steps to prevent further damage.

The MAX3238IPWRE4 is an efficient, reliable and power saving solution for point-to-point, daisy chain and multi-drop RS-485 applications. Its differential signaling architecture, auto-shutdown feature, and enhanced line fault detection and short-circuit protection make it an ideal choice for industrial and building automation systems, medical instruments, and other applications that require reliable high-speed communication.

The specific data is subject to PDF, and the above content is for reference