MAX3480ACPI+

Series:	--
Packaging:	Tube
Part Status:	Active
Type:	Transceiver
Protocol:	RS422, RS485
Number of Drivers/Receivers:	1/1
Duplex:	Half
Receiver Hysteresis:	70mV
Data Rate:	2.5Mbps
Voltage - Supply:	3 V ~ 3.6 V
Operating Temperature:	0°C ~ 70°C
Mounting Type:	Through Hole
Package / Case:	28-DIP (0.600", 15.24mm)
Supplier Device Package:	28-PDIP
Base Part Number:	MAX3480

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MAX3480ACPI+ is an extremely versatile interface device that can drive, receive, transmit, and transceive digital signals. It is an ideal choice for a variety of applications, such as interfacing with embedded systems; creating high-speed, long-distance communication links; and providing error checking and correction.The MAX3480ACPI+ provides a one-to-many (1:N) connection to allow communication with multiple devices. In this configuration, the device can act as the master and control communications with up to eight different slaves. It can also be configured as a multi-drop hub to simultaneously transmit data to multiple slaves.In both configurations, the MAX3480ACPI+ uses a 4-wire interface to establish connections. The signals include Tx (Transmit), Rx (Receive), C (Clock), and FF (Framesync). A differential output structure allows the Tx line-level signals to be transmitted across distances of up to 3,000 meters without significant degradation.The device also supports Manchester encoding /decoding, a communication technique that improves signals robustness and reliability over long distances by adding a check character for error detection and correction. This allows the MAX3480ACPI+ to increase speed of data transfer and reduce transmission errors. It supports baud rates from 1.2 Kb/s to 10 Mb/s (Rs232 to Rs485/422)The MAX3480ACPI+ also supports hardware- or software-selectable electrical and logical drive modes including half-duplex and full-duplex operation. In half-duplex mode, the Tx and Rx lines are multiplexed, which allows the device to transfer data in both directions without sacrificing efficiency due to the overhead time associated with switching between the two lines.The MAX3480ACPI+ is also configured to include a variety of serial communication interface options. This allows the device to be adapted to a custom application by selecting the options that best meet its specific requirements. The options include RS-232, RS-422, RS-485, and TTL interfaces, as well as a range of protocol options such as master-slave, multi-drop, and point-to-point protocols.The MAX3480ACPI+ also provides user configurable built-in features that allow for wide-area networking and intelligent control of devices. These features include an 8-bit general-purpose I/O port that can be used for control signaling and a digital representation of the inputs on the Rx line.The MAX3480ACPI+ also includes robust diagnostics that facilitate the debugging and verification of the system. In addition, the device provides an on-chip oscillator that can generate its own clock signal. This clock enables the device to operate in both asynchronous and synchronous mode and to automatically sample slave devices asynchronously.To facilitate the integration of the device into applications, the MAX3480ACPI+ is equipped with an integrated FIFO. This FIFO can be used to improve the performance of the device by allowing it to store data while it is being transmitted or while it is waiting for the slave device to be ready to receive data.The MAX3480ACPI+ is an incredibly versatile device that can be customized to suit a variety of applications. Its robust features and powerful performance make it an ideal choice for a variety of applications, including embedded systems, long-distance communication, and intelligent control.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description