MAX3804ETE+T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MAX3804ETE+T is a single, very low power, CMOS transceiver with many applications in the interface - drivers, receivers, and transceivers category. The device features a low-power, logic-controlled, differential, half-duplex transceiver interface with a single-ended, input/output (I/O) buffered data interface. The device is designed to operate with data rates up to 8Mbps, allowing it to be used with a wide variety of data applications including RS-232, RS-422, and RS-485, as well as other low-power serial interfaces. Its tiny 8-lead (2x2mm) package makes it ideal for designs that are space-constrained.

The MAX3804ETE+T has two operating modes, half-duplex or autobaud mode. In half-duplex mode, the input and output signals are multiplexed together on a single port. The data is transferred from the input logic state to the output logic state, and vice versa, using the logic-controlled MODE pin. In autobaud mode, the device continuously monitors the logic states on its input ports and compares them with the known logic states of the output ports. When the two sets of logic states match, the device activates its output and sends the data across the interface.

The MAX3804ETE+T transceiver interface consists of eight pins: VCC, GND, I/O, MODE, RST, CLK, TXD, and RXD. VCC and GND are the power source pins, which provide the supply voltage (VDD) for the device. The I/O pin is used to multiplex the data between the input and output ports in half-duplex mode. In autobaud mode, the I/O pin is used to provide the input signal for the device to compare against the known output logic state.

The MODE pin on the MAX3804ETE+T is used to control the operating mode of the device. When the MODE pin is set to a logic high, the device is in the half-duplex mode, while when the MODE pin is set to a logic low, the device is in the autobaud mode. The RST pin is used to reset the logic state of the device and is used to initialize the device before entering either of its operating modes.

The CLK and TXD pins are used to transmit data out of the MAX3804ETE+T’s output port. The data on the input port is synchronized with the clock signal before being transmitted out on the TXD pin. The RXD pin is used to receive data from the output port. The data is synchronized with the clock signal before being transferred from the RXD pin to the input port.

The MAX3804ETE+T is very versatile, and can be used in a variety of different applications. It can be used to drive RS-232, RS-422, and RS-485 interfaces, as well as other low-power serial protocols. It can also be used in embedded systems, and in both master and slave configurations. The device is small and low power, making it ideal for space-constrained designs, and is capable of operating at data rates up to 8Mbps.

The specific data is subject to PDF, and the above content is for reference