MAX398CSE+TG55

Switch Time (Ton, Toff) (Max):	150ns, 150ns
Base Part Number:	MAX398
Supplier Device Package:	16-SO
Package / Case:	16-SOIC (0.154", 3.90mm Width)
Operating Temperature:	0°C ~ 70°C (TA)
Crosstalk:	-92dB @ 100kHz
Current - Leakage (IS(off)) (Max):	100pA
Channel Capacitance (CS(off), CD(off)):	11pF, 40pF
Charge Injection:	2pC
-3db Bandwidth:	--
Series:	--
Voltage - Supply, Dual (V±):	±3 V ~ 8 V
Voltage - Supply, Single (V+):	3 V ~ 15 V
Channel-to-Channel Matching (ΔRon):	6 Ohm (Max)
On-State Resistance (Max):	100 Ohm
Number of Circuits:	1
Multiplexer/Demultiplexer Circuit:	8:1
Switch Circuit:	--
Part Status:	Obsolete
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The MAX398CSE+TG55 is an integrated circuit designed as an interface between analog switches, multiplexers and demultiplexers. The device can be used for a variety of applications, including signal routing, signal protection, and analog switching. It consists of two channels, each of which consists of two analog multiplexers, two analog switches, and one demultiplexer.

Applications

The MAX398CSE+TG55 can be used for a variety of applications, such as signal routing, signal protection, and analog-signal rerouting as well as switching. The device can be used in audio systems, communication systems, test equipment, motor control systems, and signal processing systems. In addition, it can be used as an isolator in signal processing systems, providing isolation of the analog inputs between different stages of the system. In automotive electronics, the MAX398CSE+TG55 can be used as a signal route switch, while in medical and industrial control systems it can be used as a signal protector.

Working Principle

The MAX398CSE+TG55 is designed to provide a variety of logic, power and signal routing solutions. The device consists of two channels, each of which consists of two analog multiplexers and two analog switches. The analog multiplexers provide the ability to route signals from one set of inputs to one set of outputs. The analog switches control the routing, by providing an electrically controlled means of rerouting analog signals between different paths. The analog switches also provide low on-resistance and low off-capacitance, making them suitable for switching high-frequency signals.The demultiplexer in the MAX398CSE+TG55 provides the ability to switch from one set of analog inputs to multiple output sources. This is done by providing an electronically controlled input signal that is routed internally to the selected output. The demultiplexer can be used to divide the input signal into two or four output channels.

Conclusion

The MAX398CSE+TG55 is an integrated circuit that combines analog multiplexers, analog switches and demultiplexers into one device. The device can be used for a variety of applications including signal routing, signal protection and analog-signal rerouting, as well as switching. It consists of two channels, each of which consists of two analog multiplexers, two analog switches, and one demultiplexer. The demultiplexer provides the ability to switch from one set of analog inputs to multiple output sources. The device is suitable for use in audio systems, communication systems, test equipment, motor control systems, and signal processing systems.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description