MAX4522CEE+T

Switch Time (Ton, Toff) (Max):	80ns, 30ns
Base Part Number:	MAX4522
Supplier Device Package:	16-QSOP
Package / Case:	16-SSOP (0.154", 3.90mm Width)
Operating Temperature:	0°C ~ 70°C (TA)
Crosstalk:	-90dB @ 100kHz
Current - Leakage (IS(off)) (Max):	1nA
Channel Capacitance (CS(off), CD(off)):	2pF, 2pF
Charge Injection:	1pC
-3db Bandwidth:	--
Series:	--
Voltage - Supply, Dual (V±):	±2 V ~ 6 V
Voltage - Supply, Single (V+):	2 V ~ 12 V
Channel-to-Channel Matching (ΔRon):	1 Ohm
On-State Resistance (Max):	100 Ohm
Number of Circuits:	4
Multiplexer/Demultiplexer Circuit:	1:1
Switch Circuit:	SPST - NO
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

MAX4522CEE+T is an ultra-low power, high performance, and low cost single 8:1 multiplexer/demultiplexer IC developed by Maxim Integrated Products, Inc. It is specially designed for applications such as switching analog signals, multiplexing analog signals, and demultiplexing analog signals. The MAX4522CEE+T is ideal for applications including antennas, digital to analog converters (DACs), crossbar switches, and RF switches.The MAX4522CEE+T is a single 8:1 multiplexer/demultiplexer integrated circuit. It is composed of two main components: a control logic and a switch array. The control logic is an 8-bit pin-selectable switch that accepts 8 control digital signals to determine which one of the 8 channels is to be connected to the output. The multiplexer/demultiplexer switch array contains 8 single pole-double throw (SPDT) switches, each switch is independent of the others and can operate at very high speed.The MAX4522CEE+T features very low power consumption and minimal switching noise. It also has excellent dc and ac characteristics, allowing it to switch high frequency signals with minimal distortion. The device operates from a single 1.8 V to 3.6 V power supply and is capable of handling input signals with a voltage range of 0.5 V to 3 V.In terms of application field, MAX4522CEe+T can be used for various applications as mentioned earlier, such as antennas, digital to analog converters (DACs), crossbar switches, and RF switches. For example, it can be used in antennas as a switching element to enable dual-band operation. When used in conjunction with digital-to-analog (D/A) converters, the MAX4522CEE+T can multiplex and demultiplex digital signals between two devices. It can also be used for routing digital signals in crossbar switches, and for switching various RF related signals in RF front-end modules.In terms of working principle, the MAX4522CEE+T is designed to act as a switch, allowing signals to pass through the array without interruption when activated. When the control logic commands a switch to open, all of the internal switches in the array concurrently switch to the open position. This allows the multiplexer/demultiplexer to interrupt signals when the appropriate control signal is issued, thereby providing a powerful level of analog signal switching and routing.The MAX4522CEE+T’s internal logic and switch array are designed to provide highly reliable operation with low times and minimal swtiching noise. This results in an improved signal-to-noise (SNR) ratio, a critical aspect of any analog signal switching, multiplexing, or demultiplexing system.Overall, the MAX4522CEE+T is an ideal choice for RF, antenna switching, and digital to analog converter applications, due to its ultra-low power consumption, high performance, and low cost. It is an outstanding option for multiplexing and demultiplexing analog signals, both for low-cost and high performance needs.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description