MAX4530CAP

Switch Time (Ton, Toff) (Max):	150ns, 100ns
Base Part Number:	MAX4530
Supplier Device Package:	20-SSOP
Package / Case:	20-SSOP (0.209", 5.30mm Width)
Operating Temperature:	0°C ~ 70°C (TA)
Crosstalk:	-92dB @ 1MHz
Current - Leakage (IS(off)) (Max):	1nA
Channel Capacitance (CS(off), CD(off)):	3pF, 15pF
Charge Injection:	1.5pC
-3db Bandwidth:	--
Series:	--
Voltage - Supply, Dual (V±):	±2 V ~ 6 V
Voltage - Supply, Single (V+):	2 V ~ 12 V
Channel-to-Channel Matching (ΔRon):	1 Ohm
On-State Resistance (Max):	75 Ohm
Number of Circuits:	1
Multiplexer/Demultiplexer Circuit:	8:1
Switch Circuit:	--
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The MAX4530CAP is a single-pole double-throw (SPDT) analog switch from Maxim Integrated. It is part of the MAX45 family of analog switches and is an effective solution for a wide variety of applications requiring precision switching of analog signals.The MAX4530CAP is typically used for applications that require low on-resistance, high off-isolation and low charge injection. In addition, the device includes a power-on reset circuit that ensures reliable operation on power-up. The switch is bidirectional, allowing both digital and analog signals to be easily switched. The MAX4530CAP also has a wide range of uses in applications such as automatic gain control, digital-to-analog converters and digital audio switches.

Description & Features

The MAX4530CAP is available in SOIC and QSOP packages, which makes it suitable for both through-hole and surface-mount board assembly. It has an operating temperature range of -40°C to 85°C and is rated for a power-supply voltage of 3.3 V to 5.5 V. A low-voltage CMOS-compatible interface ensures an easy-to-use connection and this device also features an exceptionally low quiescent current of 8 µA. The MAX4530CAP features a Break-Before-Make switching operation, which is designed to help reduce crosstalk between switched lines. Its high-impedance on-state ensures low-power consumption when switching, while its fast switching speed allows it to perform noise-free switching operations. It also has a high off-isolation voltage of 300 V, ensuring reliable operation over a wide range of input conditions.

Applications

The MAX4530CAP is an ideal option for a variety of analog switching applications. It is suitable for use in a wide range of devices such as remote-control receivers, audio amplifiers and digital-to-analog converters. It can also be used in radio systems such as FM receivers and AM radios, as well as for multiplexers, demultiplexers and modulators. In addition, the MAX4530CAP can be used for level shifting, filtering and signal mixing. It is also suitable for applications that require low-power operation over a wide frequency range and high off-isolation. Furthermore, the device can be used in a variety of systems such as automatic gain control, DC motor control and battery-powered systems.

Working Principle

The MAX4530CAP provides a simple and effective way of switching analog signals. It works by routing incoming signals through a single-pole double-throw (SPDT) switch. When the switch is in the on-state, the incoming signal is routed to one of two output lines. When the switch is in the off-state, the input signal is blocked and does not reach the output lines.The device features latch-type control inputs, which ensures that the switch remains in the desired position, even when the inputs are disabled or disconnected. The latch-type design also minimizes power consumption when the switch is in a steady-state. The MAX4530CAP also includes a power-on reset circuit, which ensures that the switch is in the same position every time the device is powered up. This circuit helps to ensure reliable operation when the device is used in a wide range of applications.

Conclusion

The MAX4530CAP is a single-pole double-throw (SPDT) analog switch from Maxim Integrated. It has low on-resistance and high off-isolation, making it ideal for applications that require precise switching. It has an exceptionally low quiescent current of 8 µA and is suitable for use in both surface-mount and through-hole boards. Additionally, the device features a latch-type control input and a power-on reset circuit. The MAX4530CAP is suitable for use in a range of applications such as remote-control receivers, digital-to-analog converters and level shifters. In addition, it is ideal for use in battery-powered systems and systems that require high off-isolation. The switch is also suitable for multiplexers, demultiplexers and modulators, making it an excellent choice for a variety of analog switching applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description