MAX4535EUD

Switch Time (Ton, Toff) (Max):	275ns, 200ns
Base Part Number:	MAX4535
Supplier Device Package:	14-TSSOP
Package / Case:	14-TSSOP (0.173", 4.40mm Width)
Operating Temperature:	-40°C ~ 85°C (TA)
Crosstalk:	-53dB @ 1MHz
Current - Leakage (IS(off)) (Max):	500pA
Channel Capacitance (CS(off), CD(off)):	5pF, 4pF
Charge Injection:	1pC
-3db Bandwidth:	--
Series:	--
Voltage - Supply, Dual (V±):	±4.5 V ~ 20 V
Voltage - Supply, Single (V+):	9 V ~ 36 V
Channel-to-Channel Matching (ΔRon):	2 Ohm
On-State Resistance (Max):	400 Ohm
Number of Circuits:	2
Multiplexer/Demultiplexer Circuit:	2:1
Switch Circuit:	DPST - NO
Part Status:	Obsolete
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Analog multiplexers, demultiplexers, and switches provide an interface between logic circuits and component level signals. They allow high impedance analog signals to be routed from one point to the other with minimal electrical noise and distortion. The MAX4535EU-D is one of the most widely used analog multiplexers and demultiplexers in the industry, and it is a key component for many high speed and high reliability applications.

The MAX4535EU-D is an 8-channel multiplexer/demultiplexer designed to interface between CMOS logic and component-level, single-ended analog signals. It is a low power, high speed device capable of handling both single- and dual-ended analog signals. It can route eight component-level signals to either a single or dual destination, or vice versa. It can be used to switch various analog signals like tension, pressure, current, and voltage signals.

The MAX4535EU-D can be used in a wide variety of applications, including analog-to-digital converter (ADC) input selection, low power switching circuits, digital-to-analog converter (DAC) output selection, and multiplexed D-type latch applications. It can also be used for multiplexing telephony signals, serial data lines, and video signals. It features a wide operating temperature range and is rated from −40°C to +85°C.

The MAX4535EU-D features a 3-state logic interface and TTL-compatible inputs. It also features a logic-controlled enable pin that disables the device when driven low. The control logic section is made up of two separate 3-state control buses that determine the two outputs. Each output is capable of driving up to 8 TTL loads. The MAX4535EU-D is designed to minimize on-state resistance, leakage current, and areal capacitance. It operates on a single +5V supply and is available in 4-pin to 14-pin packages.

The MAX4535EU-D has a typical tON (turn-on time) of 8ns and a typical tOFF (turn-off time) of 4ns. It also has a typical crosstalk of −70dB @ 1 MHz and a typical capacitance of 0.7pF. It has a maximum in-line power dissipation of 370mW and a maximum off-state current of 1µA. It is designed to meet the requirements of UL, CSA, and VDE.

The MAX4535EU-D works in a very simple way. By controlling the logic inputs, the data lines can be switched from the inputs to the outputs. This enables the device to select a single input line or multiple input lines and switch them to the outputs. When the selector lines are active, the output lines remain low or high, depending on the logic states of the inputs.

In conclusion, the MAX4535EU-D is an ideal device for use in a wide range of high speed, low power, and low distortion analog signal switching applications. Its 3-state logic interface, low power consumption, wide operating temperature range, low capacitance, and high speed capabilities make it a great choice for switching and multiplexing applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description