MAX4558CEE+

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MAX4558CEE+ is an analog switch for high speed signal switching and signal routing. Generally, the MAX4558CEE+ is used in signal acquisition, signal distribution, instrumentation, and telecom systems. It is classified as an Interface device, specifically, Analog Switches, Multiplexers and Demultiplexers.

Analog switches, multiplexers and demultiplexers are integrated circuits used to route signals from one location to another within a system, or for routing signals from one system to another system. In the case of the MAX4558CEE+, it is a high-performance, dual, single-pole/single-throw (SPST) analog switch designed to route one of two signals to a common output. It is designed to have a low ON-resistance of 2 ohms, an intrinsic OFF-capacitance of 7.5pF, an OFF-leakage of 1pA, and an operating voltage of +/-5V.

The MAX4558CEE+ is capable of switching signals up to 750MHz and is designed to work in broadband applications. It is suitable for use in high signal-to-noise ratio (SNR) systems and is capable of handling both differential and single-ended signals. It also features maximum signal crosstalk of 75dB. This level of isolation guarantee will protect signal integrity, allowing clean signal transmission with no unwanted crosstalk.

The MAX4558CEE+ Switch comes in a small package with 1.2 mm2 body size and only 11 pins, allowing for its use in space-constrained applications. It also has an operating temperature range between -40C and +85C, making it suitable for harsh working conditions. The MAX4558CEE+ also integrates protection diodes and a reverse diode network. The diodes will protect the switch against overvoltage, reverse-side current or transients.

The MAX4558CEE+ switch is designed to operate in a digital-controlled system. It is activated by a logic control signal (powered by a TTL or CMOS logic level). The logic control signal activates the switch to either a high or low position. When the switch is in the high position, the signal is routed to the output terminal of the switch. When the switch is in the low position, the signal is disconnected from the output terminal, thus isolating it from the system.

The MAX4558CEE+ has been thoroughly tested for its switch performance. The switch offers smooth switching with very low distortion and ultra-low crosstalk. The switching speed is also quite high, at approximately 15ns for a full signal transition. This ensures that signal integrity is not compromised, thereby allowing fast and accurate signal switching in a system.

In summary, the MAX4558CEE+ is a high-speed, high-performance analog switch designed to provide reliable switching and signal routing of sensitive signals. It is suitable for use in broadband applications, providing high levels of isolation, distortion, and crosstalk between signals. It is appropriately classified as an interface device and is highly capable of enabling processing of analog information.

The specific data is subject to PDF, and the above content is for reference