MAX4603EPE+

Switch Time (Ton, Toff) (Max):	250ns, 350ns
Base Part Number:	MAX4603
Supplier Device Package:	16-PDIP
Package / Case:	16-DIP (0.300", 7.62mm)
Operating Temperature:	-40°C ~ 85°C (TA)
Crosstalk:	-59dB @ 1MHz
Current - Leakage (IS(off)) (Max):	500pA
Channel Capacitance (CS(off), CD(off)):	55pF, 55pF
Charge Injection:	120pC
-3db Bandwidth:	--
Series:	--
Voltage - Supply, Dual (V±):	±4.5 V ~ 20 V
Voltage - Supply, Single (V+):	4.5 V ~ 36 V
Channel-to-Channel Matching (ΔRon):	100 mOhm
On-State Resistance (Max):	2.5 Ohm
Number of Circuits:	4
Multiplexer/Demultiplexer Circuit:	1:1
Switch Circuit:	SPST - NO/NC
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Interface - Analog Switches, Multiplexers, Demultiplexers

The MAX4603EPE+ is an analog switch, multiplexer, and demultiplexer all rolled into one integrated circuit. It is a low voltage, low power device with low on-resistance and fast switching times. It can be used in a variety of applications. This article will discuss the application field and working principle of the MAX4603EPE+.

Application Fields

The MAX4603EPE+/MAX4603EPE/MAX4603EE/MAX4603E devices are low-voltage, low-power, single channel analog multiplexers and switches with high on-resistance and fast switching times. The voltage and power requirements are below 5 volts and 1 mA, respectively. The MAX4603EPE+/MAX4603EPE/MAX4603EE/MAX4603E devices offer a wide range of applications. It can be used for data acquisition, signal routing, and remote sensing. In process control and instrumentation, it can be used for signal control and isolation. It has a high on resistance which provides excellent signal isolation and high reliability. The device is compatible with a variety of driver logic families and can be easily implemented in microprocessor-controlled systems. The device is also compatible with CCD and other two-input logic functions, making it suitable for various applications.

Working Principle

The MAX4603EPE+ switch and multiplexer/demultiplexer works by driving the ANA, INX, and SEL inputs. The ANA input is connected to the switch contact, the INX input is connected to the lower voltage for ANA, the SEL input is connected to the enable control signal, and the ONOUT output indicates if the switch is on or off.The MAX4603EPE+ is a low voltage, low power device with low on-resistance and fast switching times. It operates over a wide range of supply voltages, from 2.7V to 5.5V. The low on-resistance allows for high speed switching and a low voltage drop across the switch contact, resulting in low power consumption. When the SEL input is driven to logic high, the device will be enabled and ANA will be routed to INX while the ONOUT output will indicate the on-state of the switch. When the SEL input is driven to logic low, the device will be off and the ANA and INX pins will disconnect. The MAX4603EPE+ can be used for single-ended signal switching or for differential-ended signal switching. It is also suitable for driving CCD and other two-input logic functions.

Conclusion

In conclusion, the MAX4603EPE+ is a low voltage, low power device with low on-resistance and fast switching times. It is suitable for data acquisition, signal routing, and remote sensing. It is compatible with a variety of driver logic families and can be easily implemented in microprocessor-controlled systems. The device can be used for single-ended signal switching or for differential-ended signal switching and is also suitable for driving CCD and other two-input logic functions.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description