MAX4617CSE

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MAX4617CSE is a CMOS analog switch that is designed for high-impedance signal routing applications. It is a versatile product that includes both bidirectional and single-direction switches, multiplexers, and demultiplexers for signal routing and signal conditioning.

The MAX4617CSE is well suited for a variety of applications. It is suitable for signal routing in audio, video, communications, automotive, data acquisition, and instrumentation systems. The flexibility and low power consumption of the product makes it attractive for use in mobile application designs.

The MAX4617CSE has two operating modes, one logic high and the other logic low. In logic high mode, the input and output of the switch are connected and the signal conducted through the switch is unchanged. In logic low mode, the input and output of the switch are disconnected, resulting in an open switch. This level of flexibility gives the designer a lot of control and convenience when designing signal routing systems.

The MAX4617CSE has two input/output pins, two control pins, and a common pin. The two control pins, labeled A and B, are connected to ground in the logic high state and to a voltage supply in the logic low state. The two input/output pins are labeled C and D. In the logic high state, the C and D pins are connected to the corresponding A and B pins. In the logic low state, the C and D pins are open.

The working principle of the MAX4617CSE is based on changeover switching. When the voltage on the control pins is changed from high to low or vice versa, the MAX4617CSE switches from one state to the other. A single switch can be used to route signals between two points, or multiple switches can be used to switch multiple signals.

The MAX4617CSE can also be used as a multiplexer. Using two or more MAX4617CSE switches, multiple signals can be connected to a single input/output pin. The controlling logic can be used to switch between the different signals when needed. In the same way, the MAX4617CSE can be used as a demultiplexer, allowing signals from the same input/output pin to be routed to different outputs depending on the controlling logic.

The MAX4617CSE is a versatile analog switch with a variety of applications. Its low power consumption and flexibility make it well suited for use in mobile applications, audio and video routing, data acquisition and instrumentation, as well as other high-impedance signal routing applications. With its changeover switching technology, it can be used as a single switch, multiple switches, multiplexers, and demultiplexers.

The specific data is subject to PDF, and the above content is for reference