MAX4656ESA+

Switch Time (Ton, Toff) (Max):	200ns, 100ns
Base Part Number:	MAX4656
Supplier Device Package:	8-SOIC
Package / Case:	8-SOIC (0.154", 3.90mm Width)
Operating Temperature:	-40°C ~ 85°C (TA)
Crosstalk:	--
Current - Leakage (IS(off)) (Max):	1nA
Channel Capacitance (CS(off), CD(off)):	25pF, 25pF
Charge Injection:	23pC
-3db Bandwidth:	210MHz
Series:	--
Voltage - Supply, Dual (V±):	±4.5 V ~ 20 V
Voltage - Supply, Single (V+):	9 V ~ 40 V
Channel-to-Channel Matching (ΔRon):	--
On-State Resistance (Max):	10 Ohm
Number of Circuits:	1
Multiplexer/Demultiplexer Circuit:	1:1
Switch Circuit:	SPST - NO
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to the MAX4656ESA+

The MAX4656ESA+ is an analog switch, multiplexer and demultiplexer manufactured by Maxim Integrated. It is part of the company\'s popular MAX family of low-power, low-voltage logic switches. The MAX4656ESA+ is designed for a wide range of applications including digital signal routing, signal switching and signal multiplexing. The device is made up of one digital enable pin, which controls the "state" of the switch, four channels, each with its own switch, and an analog output pin.

Application Fields

The MAX4656ESA+ is a versatile switch, being used in a variety of application fields. These include:

• Consumer Electronics - The MAX4656ESA+ can be used as a signal routing switch, allowing signals from multiple sources to be directed to a single output. This is common in home theatre systems, where signals from a variety of sources (e.g. Disc or MP3 Player, cable/satellite tuner, etc.) need to be routed to a single audio output.
• Medical Electronics - The device can be used to route medical signals. For example, it can be used to route signals from an array of sensors to an analog-to-digital converter. It can also be used to multiplex a series of medical signals in order to transmit them over a single channel.
• Industrial Electronics - The MAX4656ESA+ can be used to switch signals from a variety of industrial devices. The device can be used to route high-speed digital signals from temperature, pressure, flow and other sensors to a digital signal processor for further analysis. It can also be used to switch signals between two digital devices, such as a controller and an actuator.
• Communications - The MAX4656ESA+ can be used to switch high-speed signals in communications systems. This includes switching signals between transceivers, receivers, and multiplexers. The device can also be used to route high-speed data from one end of a network to the other.

Working Principles

The MAX4656ESA+ is designed to be a low-power and low-voltage logic switch, making it ideal for applications where power consumption must be minimized. The device is designed to operate on a single +2.2V to +5.5V supply voltage, which helps to reduce power consumption. The MAX4656ESA+ comprises four independent analog switches, each with an enable input and exception outputs. The enable input can be used to control the switches, allowing them to be turned on or off as needed. The exception outputs allow an exception signal to be exposed when a fault is detected. The MAX4657ESA+ also includes an output pin, which is connected to a common analog bus. This allows the output signals from the four independent switches to be combined into a single signal. The analog output pin can then be used to feed a common signal to the next stage of the system. The MAX4656ESA+ is designed to handle a wide range of analog signals, from millivolts to volts. It can handle signals up to 10MHz and has a maximum propagation delay of 12ns. It has an "on-resistance" of roughly 1.5 Ohms, ensuring fast switching times and minimal signal distortion.

Conclusion

The MAX4656ESA+ is a versatile switch, multiplexer and demultiplexer suitable for a wide range of applications. Its low-voltage and low-power design make it an ideal choice for applications where power consumption must be minimized. The device is designed to handle a wide range of analog signals, from millivolts to volts, making it suitable for a variety of digital and analog switching applications. The device is applicable to multiple application fields, such as consumer electronics, medical electronics, industrial electronics and communications. With its flexible digital enable pin, exception outputs and analog output pin, the MAX4656ESA+ is a reliable and cost-effective solution for managing and routing digital & analog signals.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description