MAX4669ESE

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MAX4669ESE is an analog switch/multiplexer/demultiplexer integrated circuit (IC) from Max­i­m Integrated Products. It is a single-pole/single throw (SPST) switch ideally suited for high-impedance applications, such as antenna selection, performance monitoring, and data acquisition. The MAX4669ESE features dual digital control inputs, low on-capacitance, and low charge injection. This makes it an ideal solution for low-voltage, high-bandwidth applications.

Analog switches are an increasingly popular choice for designs where a single switch is needed to manage signals at multiple frequencies or voltage levels. The MAX4669ESE is a member of the “Series E” analog switches from Max­i­m, which are specifically designed for high-speed switching at 5 volts or higher. This makes the MAX4669ESE ideal for use in a variety of analog and digital applications, including industrial, automotive, communications, and medical electronics.

The MAX4669ESE is a low-on-capacitance, low-charge-injection switch and is designed to handle signals up to +/- 18 volts DC. The switch is designed to handle high-speed data rates of up to 160MHz and is capable of switching 10mA of continuous current. This makes it suitable for a wide variety of applications including high speed data-sampling, video switching, and analog signal routing.

The basic operating principle of the MAX4669ESE switch is as follows. When the control pin is high, the switch is closed. This applies a current to the corresponding external device, such as a digital-to-analog converter, resistor or diode. When the control pin is low, the switch is open and no current is applied. This allows signals to pass through without interruption, while still providing a level of protection from external interference.

The MAX4669ESE is a single-pole/single-throw (SPST) switch. It features a low on-resistance of 0.3Ω and a low off-resistance of 10Ω. The switch also features a low charge injection of just 1.5V and a very low on-capacitance of 0.1pF. This makes it ideal for high-bandwidth applications, as it ensures that switch transitions are fast and do not introduce noise or distortion into the signal.

The MAX4669ESE also features dual digital control inputs. This allows the switch to be used as a multiplexer or demultiplexer, enabling the selection of one signal from a larger group of signals. In multiplexer mode, the two control signals select which signal is passed through the switch. In demultiplexer mode, the two digital control pins enable the selection of a single signal from a group of multiple signals.

The MAX4669ESE is a useful and versatile IC switch/multiplexer/demultiplexer. With its low on-resistance, low charge injection, low off-resistance, and dual digital control inputs, the MAX4669ESE is ideally suited for high-impedance and high-bandwidth applications. It is suitable for a wide variety of analog and digital applications, including industrial, automotive, communications, and medical electronics.

The specific data is subject to PDF, and the above content is for reference