MAX4701EUE+

Switch Time (Ton, Toff) (Max):	35ns, 20ns
Base Part Number:	MAX4701
Supplier Device Package:	16-TSSOP
Package / Case:	16-TSSOP (0.173", 4.40mm Width)
Operating Temperature:	-40°C ~ 85°C (TA)
Crosstalk:	-79dB @ 1MHz
Current - Leakage (IS(off)) (Max):	500pA
Channel Capacitance (CS(off), CD(off)):	8pF
Charge Injection:	0.5pC
-3db Bandwidth:	250MHz
Series:	--
Voltage - Supply, Dual (V±):	--
Voltage - Supply, Single (V+):	1.8 V ~ 5.5 V
Channel-to-Channel Matching (ΔRon):	2 Ohm
On-State Resistance (Max):	75 Ohm
Number of Circuits:	2
Multiplexer/Demultiplexer Circuit:	2:2
Switch Circuit:	DPDT
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

MAX4701EUE+ is a device which falls under the Interface - Analog Switches, Multiplexers, Demultiplexers category. Its main purpose is to switch and route signals and can be used in many different applications. It is a single 8-channel, 2:1 analog multiplexer/demultiplexer and has an enable input. The device can be conditions in such a way that it can select one out of thee predetermined inputs and route the output to either one of two outputs. This makes it useful in applications such as signal multiplexing, analog routing, and electronic tuning.

The main advantage of the MAX4701EUE+ is its small size, which is only 10mm x 16mm, with a maximum height of 1.85mm. This makes it suitable for applications such as space-limited applications, handheld instruments, and compact audio/visual devices. The device can operate at supply voltages as low as 0V and can also be configured to operate at frequencies up to 1GHz. The device also has a low on-resistance of 2Ω, which means that it is able to switch and route signals quickly and efficiently.

The working principle of the MAX4701EUE+ is based on the fact that it uses FET technology to switch and route signals. When the device is enabled, the gates of the FETs are turned on, allowing signals to be routed through the channels. The channels are all controlled by separate enable lines which can be used to select which channel is active. The enable lines are also used to control which output the signal is routed to. Once the enable lines are set, the FETs act as switches, allowing the appropriate channel to open and close as needed.

The MAX4701EUE+ can be used in a variety of applications and offers an ideal combination of low on-resistance, small size, and wide supply voltages. It is suitable for use in a variety of applications such as audio/visual devices, handheld instruments, and space-limited applications. The FET technology used by the device ensures that it can switch and route signals quickly and efficiently and its wide supply voltages mean that it can be used in a wide range of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description