MAX4713ESE

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Analog switches and multiplexers are electronic devices that allow a single analog signal in multiple output signals. These devices are used to transfer the analog signals from one port to the other, from a single input, to multiple outputs and from multiple inputs, to a single output. They can also be used to isolate, select, and control, the signals entering and leaving an application. The MAX4713ESE is an analog switch device made by Maxim Integrated. This part is an SP4T device - a single pole 4 throw switch. It has an input, four outputs, and four control voltages. The switch is ideal for use in applications such mid-level applications, where low on- and off-resistance (typical 1.8Ω and 25Ω, respectively) and low power (1.8mW maximum) are desired. Its low capacitance (typically 30pF) gives it the ability to operate over a wide bandwidth also. This device also contains two enable pins that are used to control the enable and/or disable on any of the switches within the part. As an example, the enable pins can be connected to a logic level of ‘1’ to enable the respective switch and connect the input to the output. The switches are also capable of operating from a logic low level also. The device is ideal for use in mobile and portable devices, where power and space are at a premium. Its small 0.6mm x 0.6mm QFN package and its low power usage (1.8mW maximum) make it an ideal choice. The pins are arranged in two port groups with two signals each, so that two signals can be switched on and off independently of each other. The MAX4713ESE is also designed to handle signals up to 5.5V on the inputs and 1.9V on the outputs. This allows very low power signals to be transmitted across the device while still providing reliable output. The device also has an ESD rating of >8kV HBM on all pins and this makes it suitable for use in even the most difficult environments, where ESD and RF cancellation are needed. In conclusion, the MAX4713ESE is a highly versatile and powerful analog switch device. It is capable of transferring signals across multiple channels, enabling or disabling as needed, and providing low power consumption and good ESD protection. This makes it ideal for use in portable and mobile devices, where space and power are of premium importance.

The specific data is subject to PDF, and the above content is for reference