MAX5234BEUB+T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Digital to Analog Converters (DAC) are essential components for analogue processing within different circuits and systems. DACs are widely used in a variety of applications for converting the pulse-width modulation (PWM) signal into an analogue voltage or current output. The MAX5234BEUB+T is a low-power 10-bit Digital to Analog Converter (DAC) that provides accurate, wide dynamic range performance in an aggressive mapping from digital codes to corresponding analog output signals.

The MAX5234BEUB+T is constructed using BiCMOS technology and contains a 64-cell 8-bit R2R ladder array formed by 9-bit size resistors. It utilizes a 10-bit shift register, PWM and 8x6x3 decoder to enable single chip multi-channel DAC operation with low power consumption. This device has low output swing resolution, low offset voltage and high linearity of 0.0005%.

The MAX5234BEUB+T features a very small form factor of 0.85mmx0.50mm, and is capable of operating at a low operating temperature range of –40°C to 85°C. It also has an adjustable internal up- and down- scaled reference +2.5 to +12V. This device has built-in Slew Rate/Power Shutdown control circuitry that allows external control of the output slew rate by programming the power down bits of the DAC register. It also has a power output buffer with high slew rate and wide bandwidth. Moreover, the device supports both parallel and serial interface communication.

The MAX5234BEUB+T is usually applied in systems that simulate analogue signals, such as systems that measure temperature, pressure, weight, vibration, gas flow, and so on. In such systems, the output buffer of the device is used to provide an analogue signal with a high speed frequency response, large signal amplitude, high accuracy, and low distortion. Furthermore, it also finds application in signal mixing circuits, signal processing, closed loop control and instrumentation systems.

The working principle of the MAX5234BEUB+T is based on the 8-bit R2R ladder array. The device is programmed via a serial or parallel interface to select the binary codes for the DAC. These codes are then converted into proportional analogue current output that is buffered using the output buffer with high slew rate. Furthermore, the device has built-in power down control circuitry that allows external control of the output slew rate by programming the power down bits of the DAC register.

In conclusion, the MAX5234BEUB+T is a low-power 10-bit digital to analogue converter that provides accurate, wide dynamic range performance in an aggressive mapping of digital codes to corresponding analogue output signals. It is used in numerous applications, such as temperature and pressure sensing systems, signal mixing applications, signal processing and instrumentation systems. The device operates on the principle of 8-bit R2R ladder array and is programmed via either parallel or serial interface.

The specific data is subject to PDF, and the above content is for reference