MAX5801ATB+T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MAX5801ATB+T is a 16-bit, serial-input, voltage-output digital-to-analog converter (DAC) that operates from a single 2.7V to 5.5V supply. A unique feature of the MAX5801ATB+T is that it includes both a power-on reset (POR) and an S2D_RST digital reset that are controlled by two separate registers. This allows the user to reset independent of power-up.

An integrated low-noise voltage reference simplifies the design process, and allows the user to design for small sizes, space restrictions, and wide supply voltage ranges. The reference is stable with capacitive loads up to 1μF. The increased resolution provides greater linearity, precision, and dynamic range. The MAX5801ATB+T can be programmed over the entire temperature range. The power mode can be changed to save dynamic and static power.

The device operates from a single 2.7V to 5.5V supply and has an integrated high accuracy low-drift voltage reference which minimizes the required supply current and simplifies the design process. The integrated output buffer enables fast settling times and low distortion without the need for an external amplifier.

The onboard data reception circuitry performs byte-wide, three-wire serial I/O data operations. The MAX5801ATB+T promises an optimal balance between the high performance and low-power consumption while operating over the full temperature range.

Typical applications for the MAX5801ATB+T include, but are not limited to, RF signal generation, audio signal generation, sensor signal conditioning and control, programmable gain/attenuation, and industrial process control. This is all done through the medium of the DAC technology.

Working Principle: The MAX5801ATB+T Digital-to-Analog Converter (DAC) converts the digital data to an analog voltage. The digital input value is received via an external connection (SPI-bus, I2C-bus, etc) and then converted to an analog voltage based on the voltage reference. The analog voltage is then applied to the DAC output which contains a low-noise amplifier. The output voltage is then available at the DAC output pin.

The DACs internal register can be programmed to perform multiple functions such as the selection of a voltage reference, full-scale voltage range, data direction, etc. The internal register can be written via an external serial interface (SPI, I2C). The serial interface used depends on the DAC product family.

The user can control the MAX5801ATB+T to produce a wide range of output values. The full-scale voltage range can be set at 0V to Vref, or -Vref to Vref, allowing the output voltage to be either unipolar or bipolar. This allows for great flexibility in system design.

The MAX5801ATB+T is also able to self-calibrate its offset voltage with respect to its reference voltage, providing the accuracy and linearity that is required for higher resolution or higher accuracy analog designs. The self-calibration process takes less than 500μs in total.

The device can also be controlled via an external serial interface, allowing for communication between the MAX5801ATB+T and the other components in the system. This allows for better control and utilization of the device, as well as faster response times and improved resolution.

The MAX5801ATB+T can also extend the data acquisition range, because the input range of the device is not limited by the full-scale voltage. The full-scale voltage range can be changed to obtain an extended data acquisition range, while maintaining the same resolution. This is a feature that helps to improve the accuracy and linearity of the DAC.

The MAX5801ATB+T is also capable of supporting advanced features such as voltage tracking, load regulation, as well as gain and offset adjustment. These features allow for better system performance and lower power consumption, making it ideal for automated or battery-powered systems.

The MAX5801ATB+T is an ideal solution for its intended application field, and its features make it the perfect choice for a wide range of applications. The MAX5801ATB+T is highly reliable, versatile, and efficient, making it the ideal choice for a wide range of applications. It is also designed to be very low-power, and is suitable for continuous operation over the full temperature range.

The specific data is subject to PDF, and the above content is for reference