MAX5956BUEE+

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

MAX5956BUEE+ is a hot swap controller from Maxim Integrated Semiconductor Corporation. It is designed to prevent voltage surges during insertion of hot pluggable devices, which may cause a sudden draw of current or cause a short circuit.

The MAX5956BUEE+ is a monolithic device that contains a low voltage current-mode stay-on FET switch, as well as an overcurrent protection circuit and a thermally sensitive current limit. It is housed in a tiny 14-pin TSSOP package with a typical current rating of 2A and a voltage rating of 28V.

This hot swap controller is targeted towards applications such as point-to-point communication systems, Ethernet and Fibre Channel, and peripheral cards. MAX5956BUEE+ is capable of handling a wide variety of power bus conditions such as overvoltage, undervoltage and over-current conditions, allowing the safe startup and shutdown of electronic systems.

Application Field of MAX5956BUEE+

MAX5956BUEE+ is suitable for a variety of hot swap systems, such as pluggable peripheral cards, plug-in daughter cards, or any hot swap or hot plug system, such as industrial or medical devices. It is also suitable for a wide range of bus voltages, including 5V, 12V, 28V and 24V bus systems. The high current rating of MAX5956BUEE+ also makes it suitable for powering industrial machinery and electronic equipment.

The MAX5956BUEE+ can also be used in many automated systems, such as Industrial Automation and Robotics, in order to reduce the risks associated with sudden electrical surges. By protecting sensitive circuits from overvoltage, undervoltage and overcurrent conditions, the reliability of automated systems can be increased.

Working Principle

When power is applied to the MAX5956BUEE+, the system voltage is monitored by an internal comparator. When the voltage reaches a predetermined threshold, an NSO FET is turned on and current is allowed to pass through the circuit. At the same time, an overcurrent protection circuit is enabled, which is triggered when the current exceeds a predetermined threshold and shuts off the FET switch. The thermally sensitive current limit prevents the FET switch from being turned on when the temperature is too high.

In order to ensure safe operation, the MAX5956BUEE+ is also equipped with a power-on reset circuit and a soft delayed start-up circuit. The power-on reset circuit ensures that the controller is only enabled when the power supply is stable, while the soft delayed start-up circuit ensures that the FET is not turned on until the voltage reaches its specified levels.

The MAX5956BUEE+ also has several safety features, including an overtemperature protection circuit and an overtemperature reset circuit. These circuits are designed to control the temperature of the device, in order to avoid any damage that may be caused by an excessive rise in temperature. In addition, the MAX5956BUEE+ also includes an overtemperature detection circuit, which will shutdown the FET switch if the temperature exceeds a certain threshold.

Conclusion

The MAX5956BUEE+ is an ideal hot swap controller for a wide range of applications, from industrial automation and robotics to point-to-point communication systems. It is capable of handling a wide range of power bus conditions, ensuring a safe startup and shutdown of electronic systems. Its robust safety features, such as overcurrent and overtemperature protection circuits, make it an ideal solution for many applications.

The specific data is subject to PDF, and the above content is for reference