MBR1045 Discrete Semiconductor Products

Series:	--
Packaging:	Tube
Part Status:	Active
Diode Type:	Schottky
Voltage - DC Reverse (Vr) (Max):	45V
Current - Average Rectified (Io):	--
Voltage - Forward (Vf) (Max) @ If:	650mV @ 10A
Speed:	Fast Recovery = 200mA (Io)
Current - Reverse Leakage @ Vr:	1mA @ 45V
Capacitance @ Vr, F:	400pF @ 5V, 1MHz
Mounting Type:	Through Hole
Package / Case:	TO-220-2
Supplier Device Package:	TO-220AC
Operating Temperature - Junction:	-55°C ~ 150°C

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to MBR1045

MBR1045 is a rectifier diode made with a very fast recovery time. It is a single diode and is often used in applications that require fast speed and need to convert AC power to DC power. It has low forward voltage drop and low leakage current characteristics and can be used in a variety of applications in both AC and DC power supply systems.

Applications of MBR1045

MBR1045 rectifier diodes are used in a variety of applications including power supplies, TV circuits, switching circuits, motor control, and battery charging. They can be used as a rectification source in televisions and monitors and can be used as a speed control rectifier in motor control applications. They can also be used in various switched-mode power supplies to provide fast and accurate conversion from AC to DC power and also provide protection against overloading and short-circuiting. In addition, MBR1045 rectifier diodes can be used in battery charging systems to provide fast and accurate conversion from AC to DC power and can also be used in bridge rectifiers for applications such as welding and automotive circuits. They can also be used in vibration and seismic sensors for accurate detection of movement and vibrations in industrial applications.

Working Principle of MBR1045 Rectifier Diode

The working principle of an MBR1045 rectifier diode is based on the fact that current can flow in only one direction through the diode. When a voltage is applied across the diode, a forward-biased diode allows current to flow and conducts. When a reverse voltage is applied, a reverse-biased diode will block current, acting as an insulator.In a typical application, a half-wave rectifier uses a single MBR1045 diode to convert an alternating current (AC) waveform to a pulsed direct current (DC) waveform. When the voltage of the AC waveform goes above the forward voltage drop of the diode, the diode will start to conduct and the current will flow across the diode from the anode to the cathode. As the voltage of the AC waveform rises, the diode’s current flow increases, allowing more power to be converted.

Conclusion

MBR1045 is a rectifier diode with a fast recovery time and is suitable for many applications. It can be used as a single diode in AC and DC power supply systems and can be used in bridge rectifiers and various switched-mode power supplies. Its main advantages are low forward voltage drop, low leakage current, and fast switching. The working principle of MBR1045 is based on the fact that current can only flow in one direction through the diode.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description