MBR30035CT

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MBR30035CT is a diode rectifier array that is commonly referred to as a three terminal device. It is commonly used in applications such as power conversion and conditioning, electronic lamp dimming, and power switching. The MBR30035CT is classified as a Schottky type rectifier array and it operates with a forward voltage drop of 0.5V when conducting. The device also has an extremely low thermal resistance of 1.8K/W for efficient operation.

The MBR30035CT is primarily designed for use in signal and power conditioning applications but can also be effectively used in DC-DC conversion applications, motor control, and other similar types of applications. The device is constructed with three terminals - an anode, cathode, and gate. The anode and cathode terminals are connected to two separate rectifying arms of the device, and the gate terminal is connected to the cathode of the primary arms (arm 1) of the device. The gate terminal is also responsible for turning the entire device on or off.

The primary purpose of the MBR30035CT is to help regulate the flow of current. The device is designed to operate during both static and dynamic conditions with a very high frequency response. The gate terminal acts as a switch, allowing currents to flow through the device when it is turned on and then stopping currents from flowing through the device when it is turned off. In static conditions, the device will operate in a linear fashion and provide a steady current without any unwanted variations in current. In dynamic conditions, the device will provide a quick response by turning on or off instantly.

The operation of the MBR30035CT follows the laws of Ohm’s Law, which states that current is proportional to the applied voltage. When the anode is supplied with a positive voltage, the gate terminal must be grounded in order to draw current. The gate voltage then determines the amount of current that will flow through the device. By controlling the gate voltage, the user can manipulate the amount of current that flows through the device, thus controlling the output of the device.

The MBR30035CT is a three terminal diode rectifier array that is highly efficient and versatile in various applications, such as power conversion and conditioning, electronic lamp dimming, and power switching. It is a Schottky type rectifier array that operates with a forward voltage drop of 0.5V when conducting and has an extremely low thermal resistance of 1.8K/W for efficient operation. The device is able to work in both static and dynamic conditions with a very high frequency response and is able to easily regulate the amount of current that flows through it. The MBR30035CT is an optimal solution for a wide range of applications where a low forward voltage drop and high current capacity are needed.

The specific data is subject to PDF, and the above content is for reference