MBRD5H100T4G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A diode is a type of semiconductor device, usually considered solid-state in nature, which has the capability to conduct current in one direction and block it in the other. Regarding diodes, an ideal diode would perfectly conduct current in one direction and perfectly block current in the opposite direction. Such a device is not realistically achievable; as such, real diodes feature non-ideal characteristics. Diodes have myriad varied applications, from conversion of alternating current (AC) to direct current (DC) and rectifying AC components to using diodes as switches. An MBRD5H100T4G is a fast-switching device, which is a single diode rectifier with a typical forward current rating of 100A and a peak repetitive reverse voltage of 400V. The MBRD5H100T4G diode is smaller in size than conventional power diodes, providing a quick and convenient solution in power switching and protection applications.

In a typical power supply, a rectifier is located after the filter. A rectifier is an electrical device designed to convert alternating current (AC) to direct current (DC). The rectifier is formed by combining two or four diodes in the correct configuration. It is designed to serve two main purposes: first, the rectifier allows current to pass through it in one direction only, blocking any current flow in the opposite direction; second, it smoothens the output of the AC voltage by changing the AC voltage into a DC voltage. If a full-wave rectifier is used, then the average output DC voltage is about 87.5 percent of the peak value of the AC voltage source.

Full-wave rectifiers make use of four MBRD5H100T4G diodes (two diodes for each half cycle). In the forward direction, a diode is declared to be forward-biased. In the forward direction the circuit is considered to be in the conduction state and the diode can be seen to act as a perfect conductor, with a low voltage drop of typically 0.6V or less across it. Conversely, when the diode is in the reverse direction, the voltage applied to it is referred to as the reverse bias voltage and the resistance of such a diode is considered very high and is termed as the breakdown voltage of the diode. Since the reverse bias voltage is of no significant consequence in the forward direction, one of the functions of the diodes is to conduct during the positive half cycle only and block during the negative half cycle.

The MBRD5H100T4G diode is a versatile rectifier. It has a high PIV rating of 400V and can support a current of up to 100A. Depending on the application, the MBRD5H100T4G can be used as a freewheeling diode, surge absorber, or clamping diode. It can also be used in power factor correction circuits, on-load tap changers, uninterruptible power supplies, and active power filters.

In general, the use of the MBRD5H100T4G rectifier is in environments that require quick and effective switching at high currents and voltages. This is due to its high pulse current rating, which allows faster switching while maintaining low forward voltage drops. This fast switching can be useful in applications, such as power factor correction and soft start circuits, where a fast response time may be necessary. It is also employed in switching and protection circuits that require heavy current handling capabilities.

In summary, the MBRD5H100T4G is a single diode rectifier that is used to convert AC to DC and provide fast switching capabilities in heavy current applications. The device is significantly smaller and has a higher PIV rating than conventional diodes, making it an attractive solution for various power switching and protection applications. The MBRD5H100T4G is capable of high pulse current ratings and has low forward voltage drops when switching, meaning it can be used in applications requiring quick response times.

The specific data is subject to PDF, and the above content is for reference