MBRH20020

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The diode is a two terminal electronic device which allows current to pass in one direction and blocks current in the opposite direction. The MBRH20020 single-phase silicon Bridge rectifier is a special kind of rectifier that utilizes a special configuration of four diodes to provide full-wave rectification. This device is suitable for a wide range of applications and is popular due to its high efficiency and low cost.

The MBRH20020 is a single-phase, full-wave bridge rectifier. It is an extension of the single-phase diode bridge rectifier and uses four diodes in a bridge circuit to convert an AC input into a DC output. This type of rectifier is unique in that it avoids many of the drawbacks of the single-phase diode bridge rectifier, such as losses due to the requirement of a center tapped transformer. Since the MBRH20020 rectifier does not require a center tapped transformer, it can operate at higher frequencies and therefore provide a more efficient power conversion.

In operation, the MBRH20020 bridge rectifier utilizes four diodes in a square configuration in order to convert an AC signal into a DC signal. When the AC signal is applied to the bridge, the positive and negative cycles of the signal forward bias two of the diodes while the other two are reverse biased. Current then flows through the forward biased diodes, and the load is connected across the two output terminals. The bridge will then convert the alternating current from the AC signal into unidirectional current from the DC output.

The MBRH20020 is one of the most commonly used rectifiers for a variety of applications. It is most commonly used in power supply designs as it is cost-effective, efficient, and can provide a higher degree of ripple suppression compared to other types of rectifiers. It can also be used in inverter and motor drives, automotive, and DC lighting applications. The device can provide up to 200 Amps at a voltage of 650V, has a switching frequency of up to 200kHz and an operating temperature range of -40 to +125°C.

In summary, the MBRH20020 is an efficient and cost-effective single-phase Bridge rectifier that can be utilized in a wide range of applications. It utilizes four diodes in a bridge configuration in order to convert an AC signal into a DC signal, and can provide up to 200 Amps at a voltage of 650V. It is suitable for power supply designs, inverters and motor drives, automotive, and DC lighting applications thanks to its high efficiency, low cost and wide operating temperature range.

The specific data is subject to PDF, and the above content is for reference