MC10XS3435DHFKR2

Voltage - Supply (Vcc/Vdd):	3 V ~ 5.5 V
Base Part Number:	MC10XS3435
Supplier Device Package:	24-PQFN (12x12)
Package / Case:	24-PowerQFN
Operating Temperature:	-40°C ~ 150°C (TJ)
Fault Protection:	Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage
Features:	Internal PWM, Slew Rate Controlled, Watchdog Timer
Input Type:	--
Rds On (Typ):	10 mOhm (Max), 35 mOhm (Max)
Current - Output (Max):	6A
Series:	--
Voltage - Load:	6 V ~ 20 V
Interface:	SPI
Output Type:	N-Channel
Output Configuration:	High Side
Ratio - Input:Output:	1:1
Number of Outputs:	4
Switch Type:	General Purpose
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

PMIC (Power Management Integrated Circuit) is an integrated circuit used to manage a device\'s power components, such as power distribution switches, load drivers, and power management modules. The MC10XS3435DHFKR2 is a member of the family of PMICs and it is used to provide power and protection for applications that require low power, high speed, and low current. In this article, we will take a look at the application field and working principle of MC10XS3435DHFKR2.

Application field

The MC10XS3435DHFKR2 is designed to be used in applications that require low power, high speed and low current. The power supply can be either single 5V or multiple supply voltages. The device is suitable for applications such as mobile phone power management, automotive power management, consumer electronics, and industrial controllers.The MC10XS3435DHFKR2 has two Digital Output Pins and two die pads that can be used to control the power supply or other devices. It is a small form factor device, making it ideal for applications where space is limited.

Working principle

The MC10XS3435DHFKR2 works by controlling two switches in order to switch between either 5V or multiple supply voltage. Two Load Drivers are connected to the On/Off pins of each switch. When the On/Off pins are set to “On”, the Load Drivers are enabled and the circuit is energized. The Load Drivers control the current to the connected component and thus, the power supply and current related parameters can be adjusted accordingly. In addition, the MC10XS3435DHFKR2 also features over-voltage protection, over-current limit, soft-start, shut down, and adjustable current-limit levels. The device is able to detect when the connected component has an active signal and will then energize the circuit. This allows for improved power efficiency and reliability. Finally, the MC10XS3435DHFKR2 is able to function at temperatures from -40°C up to 125°C. This broad temperature range allows the device to operate in harsh environmental conditions.

Conclusion

The MC10XS3435DHFKR2 is a power management integrated circuit designed for applications that need low power, high speed, and low current. It works by controlling two switches in order to switch between either 5v or multiple supply voltage. The device has two Digital Output Pins for controlling the power supply, two Load Drivers for controlling current and a set of parameters for adjusting the power supply and current. In addition, the MC10XS3435DHFKR2 is temperature-resistant, allowing it to operate under a wide range of environmental conditions.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description