MC14028BCPG

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MC14028BCPG is a 16-stage static shift register with three-state outputs and provisions for both parallel and direct shift register operations. This type of device is classified as a signal switch, multiplexer, and decoder, and it is used in a wide variety of applications ranging from systems with medical diagnostic and monitoring functions to conventional industrial automation, robotics, and test and measurement areas.

This type of device is typically used to manage signal switching, which is the appropriate routing of signals to their intended destinations. It may be used, for example, to multiplex various analog or digital data, or to decode some type of address. The shift register can achieve such functions by taking a data signal or address, shifting it along its data points, and utilizing its three-state outputs to send out the shifted data.

The MC14028BCPG is designed with 16 stages that can be used in parallel operations or in direct shift register operations. The stages consist of Flip-Flops, a set of data inputs (D), and two control inputs (CPP and CNP). Data can be shifted through the register via the CNP input and the output of each stage can be turned on (active) or turned off (inactive) via the CPP input. Each stage also contains a 3-State output with complementary outputs that are either enabled (active) or disabled (inactive).

In parallel operations, the MC14028BCPG operates as a simple 16-bit static shift register. Depending on its operating mode, the device can be used as an output register to store data, an input register to capture data, or a delay line for synchronization purposes. The device is versatile enough to perform in uni-directional or bi-directional functional modes.

In direct shift register operations, the MC14028BCPG behaves like a serial-in/serial-out shift register. It can shift either direction dependent on the input. Shift register operations are used for many purposes such as parallel-to-serial conversion, serial-to-parallel conversion, and serial data transmission.

The MC14028BCPG can also be used in digital second-order error correction coding, combiners and synthesizers, or gating functions when combined with other circuits. It can also be used in the generation of spread-spectrum signals or the logical combination or rearrangement of data signals.

Overall, the MC14028BCPG is a useful and versatile device in terms of signal switching, multiplexing, and decoding operations. Its 16-stages of three-state outputs allow for a wide range of applications and efficient use of resources. It can be used in stand-alone operations or combined with other circuitry to perform more complex functions.

The specific data is subject to PDF, and the above content is for reference