MC14040BDTR2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

An MC14040BDTR2 is a logic device that falls under the category of Counters, Dividers. It relieves the need of system designer from the complexities of creating large scale logic circuits for applications such as digital frequency meters and adjusters. These counters are a part of the standard Voltage-Controlled Oscillator (VCO) family from ON Semiconductor. This device consists of two parts, an eight bit Binary Ripple Counter and a 16 Stage Register.

The Ripple Counter portion of the MC14040BDTR2 is a 8 bit synchronous counter which further divides the input signal into 8 separate outputs. It can accept input frequency ranging from 10 Hz to 10 kHz. The output of this counter can be connected to the input of the 16 stage Register portion. The Register portion can be programmed to set different stages of the register and provide an output based of the corresponding counter values. The stages can be setup to reset the counter at different stages, enabling pulse counting applications.

The Register portion of the MC14040BDTR2 works on the principle of parallel loading the data from the Counter section. When the Reset pin is pulled low, this device allows preloaded logic values to be fed externally. When the Reset pin is released high, the data stored in the Register part is transferred to the Counter part via the SYN input. This makes the device an ideal solution for low-frequency applications.

The MC14040BDTR2 can be used in a variety of application fields. It is typically used in digital frequency meters for counting frequency of input signal, pulse rate counters and similar counting applications. It is also used in microcomputer systems and other logic systems as an adjustable and low-frequency frequency divider. The device can also be used as a clock divider in microprocessor-based systems.

The MC14040BDTR2 is a relatively low-cost and easy to use device that provides stability and precision in counting and dividing input frequencies. It comes with a wide range of adjustable settings which makes it suitable for a variety of applications. Additionally, it occupies minimal space on a circuit board, making it an ideal solution for applications where space is limited.

The specific data is subject to PDF, and the above content is for reference