MC34161DG

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Power management integrated circuits, or PMICs, are designed to provide control and monitoring of multiple power supply rails, often at the same time. The MC34161DG by NXP Semiconductors is no exception. This IC is a supervisor IC, also known as a resetable IC, and has two major uses. The MCUD461DG can be used to detect voltages outside of the normal operating range and initiate corrective measures, or provide a reset when that voltage goes outside of the normal operating range.

The MC34161DG can be used to detect a voltage outside of the normal operating range from an autonomous system, such as an automotive application. In such a case, it can be used to protect the system from damage caused by an over or under voltage situation. It will detect an out-of-range situation and initiate corrective action by resetting the system or providing an interrupt. Additionally, it can detect a drop in voltage, such as when the battery is depleted, and then provide a reset of the system.

The MC34161DG can also be used in standby power supply applications. When the main power supply is in a low power mode, the MC34161DG can be used to provide a reset signal to the system when the voltage of the main power supply is too low. Additionally, it can provide a reset signal to the rest of the system when the voltage of the main power supply is too high.

The MC34161DG is a bipolar monolithic integrated circuit with a supply current of less than 1µA. It has an operating voltage range of 1.2V to 6V, and can monitor up to two supply rails. It has two PINs, a reset output PIN and a reset input PIN. The reset output PIN of the MC34161DG is open drain, and the reset input PIN is an active low input. The reset output is triggered when the voltage on either of the two supply rails is outside the normal operating range.

The MC34161DG has an adjustable threshold voltage, with a range of 0.6V to 6V. This can be set to ensure the correct reset voltage is detected. The reset output is asserted during the power-on sequence and de-asserted when the voltage is within the threshold voltage range. The device also has an adjustable reset pulse length, ranging from 100µs to 2.5s, which is useful for different system requirements.

The MC34161DG is an ideal choice for applications that require protection from over or under voltage, or where a reset signal is needed during low power states. It is a highly reliable and very versatile supervisor IC, and can be used to monitor, protect, and control multiple power supply rails. This makes it a valuable asset for both automotive and standby power supply applications.

The specific data is subject to PDF, and the above content is for reference