MC74HC4538ADTR2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Logic - Multivibrators are widely used in many industries, such as automotive, telecommunications and space-based applications, to provide electrical timing and control signals. One of the most common types of Logic - Multivibrator is a dual flip-flop circuit, which is capable of being in one of two binary (digital) states at any given time. The MC74HC4538ADTR2 dual flip-flop, produced by ON Semiconductor, is one such device, and is widely used in a variety of industries due to its high performance, small size, and low current consumption.

The MC74HC4538ADTR2 is a dual, monostable, edge-triggered, flip-flop with a propagation delay of 4.0ns typical at 5V. It uses two D-type flip-flop structures integrated in a single package. It uses three input/output pins – Clock, Output Enable and Reset. These pins are used to enable the device to function with some required inputs, and to provide the necessary outputs. The dual flip-flop can be configured to operate as a static (single-shot) or dynamic (repeating) Logic - Multivibrator, depending on the application.

When the MC74HC4538ADTR2 is used as a static Logic - Multivibrator, the pins Clock, Output Enable and Reset need to be connected to address decoder logic circuitry. The Clock and Reset pins are used to detect the rising and falling edges of the input signal respectively. The Output Enable pin is used to enable the device to operate. When the static Logic - Multivibrator is triggered (by a rising edge on the Clock pin) the outputs of the dual flip-flop are switched, the Output Enable pin is set to low and the Reset pin is set to high. The outputs will remain in this state until the Reset pin is set to low again, thus resetting the device.

When the MC74HC4538ADTR2 is used as a dynamic Logic - Multivibrator, the pins Clock, Output Enable and Reset are connected to microprocessor logic components. The signals from the Clock and Reset pins are continuously monitored by the microprocessor and if a rising edge is detected on the Clock pin, the microprocessor will set the Output Enable pin to low and the Reset pin to high. This will result in the outputs of the dual flip-flop being switched. The Reset pin will remain low until the microprocessor resets it, thus resetting the device.

The MC74HC4538ADTR2 dual flip-flop circuit has become increasingly popular due to its low current consumption and high performance. It is also ideal for applications where fast response times and high accuracy is required. In automotive, telecommunications and space-based industries, the MC74HC4538ADTR2 is often used to generate timing and control signals, or for other digital circuit applications that require rapid switching between two binary states. Additionally, its small form factor is also well-suited for applications where space is limited.

The specific data is subject to PDF, and the above content is for reference