MC74VHC259DTG

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MC74VHC259DTG is a type of logic subcomponent designed for use in digital logic circuit systems. It belongs to a family of logic components called Latches, which are used to create memory in digital circuits. This component is a type of resource that allows a digital system to store data and multiple values and also helps to adjust the timing of the switching of other components in the circuit.

The MC74VHC259DTG latch is used to store data which is usually in the form of a series of bits. It is also known as a data latch, as it is designed to hold, recall and store data bits as needed. It is designed to be a cost-effective and reliable type of digital logic component. The MC74VHC259DTG can be used in a variety of application fields, such as embedded systems, digital communication systems, solid-state drives and automotive systems.

Working Principle

The MC74VHC259DTG latch stores data values by using transistors to represent binary states (i.e. 1 or 0). The MC74VHC259DTG latch consists of three parts: two-inputs, an enable pin, and two outputs. These input pins accept either 0 or 1, depending on their logic level. When the enable pin is set to high, the latch “locks” the data currently present at the inputs to the outputs. When the enable pin is set to low, the latch’s output is disabled, preventing any data from being stored.

When the inputs are set to low, the logic values that are considered “low” by the latch system (i.e. 0 or 1) are registered even if a voltage variation from 0V to 5V is present. This variation is very important in terms of triggering the input. When the inputs are set to high, the voltage margins are 0V to 12V, which is much steeper than the 5V margin.

The MC74VHC259DTG latch is a one-bit memory cell, meaning that it is capable of storing a single bit of information. The overall information stored into the latch is determined by two conditions: the presence or absence of the logic one (1) signal and the presence or absence of the logic zero (0) signal. In order for the latch to store data successfully, both inputs of the same latch must be held at either a 0 or 1 level. This will “lock” the data in place.

The MC74VHC259DTG latch is designed to reduce noise interference, make for a more reliable product, and provide cost-effective design. The latch system also eliminates the need for other transistor-based memory cells, which in turn can reduce the circuit size and cost significantly. Overall, the MC74VHC259DTG is an excellent choice when designing digital logic circuits.

The specific data is subject to PDF, and the above content is for reference