MC78L15ACDR2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

PMIC, or Power Management Integrated Circuit, is a key component in power management applications. It integrates multiple power management functions into a single chip, and enables efficient and cost-effective power management. The MC78L15ACDR2 is a three-terminal linear voltage regulator that’s commonly used in power management applications.

The application field of the MC78L15ACDR2 includes automotive, motor control, medical, communications, and consumer applications. The MC78L15ACDR2 can be used for a variety of tasks, such as powering delicate load circuits, providing system monitoring, providing current limiting, and providing over-voltage protection.

The MC78L15ACDR2 utilizes negative-feedback control to regulate the output voltage. The output voltage is proportional to the voltage on the adjust pin. The difference between the input and output voltages is known as the dropout voltage. The dropout voltage of the MC78L15ACDR2 is typically 1.2V and has a maximum rating of 2V.

The device has two operating modes: dropout and tracking. In dropout mode, the output voltage is approximately 1.2V lower than the input voltage. In tracking mode, the output voltage is determined by the voltage connected to the adjust pin. This voltage can be an adjustable voltage reference, a potentiometer, or an external voltage source.

In addition to voltage regulation, the MC78L15ACDR2 also features an over-current/thermal shutdown circuit. This circuit monitors the output current and shuts down the device if the output current exceeds its rated safe limit. This protects the device from thermal runaway due to excessive output current, and prevents damage to the power management system.

The MC78L15ACDR2 can also provide features such as soft-start and current limit. Soft-start helps prevent in-rush current during startup, and current limit helps protect the device by limiting the output current. The current limit is adjustable, allowing the user to fine-tune the device’s performance.

The MC78L15ACDR2 is a high-efficiency device and has a typical efficiency rating of 80% at full load. This makes it suitable for low-power applications, where an efficient power management system is necessary. Since the device is a three-terminal linear regulator, it draws only a small quiescent current and has an input voltage range of 2V to 37V.

The MC78L15ACDR2 is ideal for applications that require low noise, high accuracy, and high efficiency. It is a reliable device that can be used in a variety of power management applications.

The specific data is subject to PDF, and the above content is for reference