MC9S08EL16CTL

Program Memory Type:	FLASH
Base Part Number:	MC9S08EL16
Supplier Device Package:	28-TSSOP
Package / Case:	28-TSSOP (0.173", 4.40mm Width)
Operating Temperature:	-40°C ~ 85°C (TA)
Oscillator Type:	External
Data Converters:	A/D 16x10b
Voltage - Supply (Vcc/Vdd):	2.7 V ~ 5.5 V
RAM Size:	1K x 8
EEPROM Size:	512 x 8
Series:	S08
Program Memory Size:	16KB (16K x 8)
Number of I/O:	22
Peripherals:	LVD, POR, PWM, WDT
Connectivity:	I²C, LINbus, SCI, SPI
Speed:	40MHz
Core Size:	8-Bit
Core Processor:	S08
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The MC9S08EL16CTL is a low-power, 8-bit microcontroller from the S08 family of microcontrollers from NXP (formerly Freescale Semiconductor). It is designed for applications that require advanced timer and interrupt capabilities, high performance GPIO, large and/or diverse peripherals, robust reliability and small form factor. MC9S08EL16CTL is an ideal solution for embedded applications in consumer, industrial, automotive, and communications markets.

Application Field

The MC9S08EL16CTL is commonly used in consumer devices such as digital cameras, set-top boxes, gaming systems, mobile phones, and home automation systems. It is also used in industrial controls such as PLCs, machine monitoring/maintenance systems, remote monitoring systems, motor controllers, and motor drives.In terms of automotive industry, the MC9S08EL16CTL is used in safety system applications such as braking and ACC systems, collision avoidance systems, environmental monitoring systems, electronic fuel injection systems, and airbag control systems. Finally, its use in telecommunications is increasing as it is used for 4G/LTE handset design and other related radio frequency (RF) applications.

Features

The MC9S08EL16CTL offers low power consumption, a rich set of peripherals, and very compact form factor. It is based on the 8-bit NXP S08 core, and has 32KB of flash memory and 2KB of RAM.The MC9S08EL16CTL features 16-bit Timer Two Pulse Width Modulators (TPMs), two CAN modules, a low-power oscillator (LPO), and many on-chip peripherals. It has 16 channels of multi-channel Analog-to-Digital converter (ADC), an RTC and a Programmable Gain Amplifier (PGA). Additionally, the MC9S08EL16CTL also features various analog front-end peripherals such as Comparators, a Voltage Reference unit and a Temperature Sensor. Some of the key features of the MC9S08EL16CTL are listed below:

• 16-bit fixed-point Central Processing Unit (CPU)
• 32 KB of flash memory and 2 KB of RAM
• 16-bit Timer Two Pulse Width Modulators (TPMs)
• 2 CAN modules
• 16 channels of multi-channel Analog-to-Digital converter (ADC)
• RTC and Programmable Gain Amplifier (PGA)
• Integrated Comparators, Voltage Reference unit and Temperature Sensor
• Low power consumption
• Very compact form factor

Working Principle

The MC9S08EL16CTL operates in single chip mode, meaning the application logic is located on the chip. Data that is transferred between the application logic and peripherals is encoded and decoded as serial packets. The data packets are communicated between devices via interconnects such as SPI, UART, I2C, etc.The CPU of the MC9S08EL16CTL is responsible for the execution of instructions from the application\'s software program. The CPU accesses sections of flash memory which store the compiled program instructions. It then executes these instructions using internal registers, an arithmetic logic unit (ALU), and several special purpose microinstructions.The CPU also communicates with external peripherals using specially designed instructions. These instructions are part of the object code generated by the compiler and will result in instructions sent over an interface such as SPI, CAN, LIN, UART, or I2C.When the CPU receives data from a peripheral, it places it in a specific area of memory. This is called Direct Memory Access (DMA) and is commonly used in low-end embedded designs. The data is then sent to the Application Design Layer (ADL) where it is processed and a response is then sent back to the application logic.The MC9S08EL16CTL also contains a Low Voltage Programmable Device (LVP), an event-triggered interrupt controller (INT), and an interrupt resource manager. The low voltage programmable device provides the ability to reprogram the device without powering down the device, while the interrupt controllers allow the CPU to handle interrupts from external resources in a timely manner.

Conclusion

The MC9S08EL16CTL is a low-power, 8-bit microcontroller from the S08 family of microcontrollers from NXP. It is designed for applications that require advanced timer and interrupt capabilities, high performance GPIO, large and/or diverse peripherals, robust reliability and small form factor. The MC9S08EL16CTL is commonly used in consumer devices, industrial controls and automotive safety systems. The MC9S08EL16CTL features 16-bit Timer Two Pulse Width Modulators (TPMs), two CAN modules, a low-power oscillator (LPO), and many on-chip peripherals. Its CPU accesses sections of flash memory that store the compiled program instructions and is responsible for the execution of instructions from the application\'s software program. Additionally, it also communicates with external peripherals using specially designed instructions and Direct Memory Access (DMA) and handles interrupts from external resources via the interrupt controllers. The MC9S08EL16CTL is an ideal solution for embedded applications in consumer, industrial, automotive, and communications markets.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description