MCP1316T-44JE/OT

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

PMIC stands for Power Management IC, and is a type of integrated circuit (IC) used to monitor and manage power supplied to other electronic components. Supervisors are a type of PMIC, specifically designed to monitor and protect peripheral ICs from damage due to excess current, wrong polarity, or over-voltage. The MCP1316T-44JE/OT, a micropower voltage supervisor, is an example of this type of PMIC.

The MCP1316T-44JE/OT is a 4-to-1 input voltage supervisor with push-button reset. It is designed to monitor and protect microcontroller-based systems by signaling a fault condition when the voltage at the monitored inputs deviates from its preset constraints. This allows the system to detect and report the fault without system reset or interruption.

The device has an typical supply current of only 0.37 µA at 2.7 V, making it suitable for high-efficiency, low-power designs. It also features an active-low power-on reset (POR) output and an active-low, open-drain reset output. In addition, the MCP1316T-44JE/OT has power-fail protection, reset on brown-out, reset with push-button, reset with power-on, under-voltage, and over-voltage detect functions.

The MCP1316T-44JE/OT has various applications, such as battery-powered consumer, automotive, and industrial applications. It can be used to protect microcontrollers and other ICs from damage due to over or under voltage, or wrong polarity. It is also used in battery-powered systems, as it can detect low voltage conditions, and trigger a power-on reset and shut down the system to prevent damage to the device.

The core of the MCP1316T-44JE/OT is a 4- to-1 multiplexer with an on-chip comparator, which monitors a set of input voltage levels. The multiplexer can select one of four voltage inputs, and route it to the comparator for comparison against the voltage threshold. When the voltage level deviates from its expected range, the comparator triggers a fault indication, through the RESET signal.

The push-button RESET signal is a digital input pin, which forces the RESET signal. Buttons are often used to force a reset during system powered-up after a power failure.

The power-on reset signal is an active-low signal generated when the supply voltage exceeds the power-up threshold voltage. This signal is used to indicate that power has been supplied to the device. Additionally, the power-failure protection pin will force an active-low signal in cases of power failure.

The under-voltage detection function of the MCP1316T-44JE/OT allows the system to detect and report a fault when the voltage is below the expected level. This could be used, for example, to shut down a system if the battery voltage falls below a certain level.

The over-voltage detection function of the device ensures that any voltage greater than the expected level will force the RESET signal. This is especially useful in battery-powered systems, where the battery voltage could increase as a result of a faulty charger. It is also useful in automotive and industrial applications where voltage levels may exceed the expected limits.

The MCP1316T-44JE/OT can be used to protect peripheral ICs from damage due to a wide range of power supply abnormalities. Its small size, low supply current, and high integration make it ideal for small, battery-powered systems. It is also suitable for automotive and industrial applications, where it can be used to monitor and protect against over-voltage and under-voltage conditions.

The specific data is subject to PDF, and the above content is for reference