MCP1824T-ADJE/OT

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

MCP1824T-ADJE/OT is a 1.8A to 4A, adjustable output voltage, low dropout (LDO) linear regulator. It is part of the PMIC-Voltage Regulators-Linear category. It is designed to provide a precise output voltage adjustable from 1.2V to 22V with a 1% accuracy over the entire temperature range. This Low-Dropout Regulator (LDO) is available in compact packages of 3.3mm x 3.3mm to save board space. This regulator has a built-in voltage reference and a low quiescent current of 7.5uA. In addition, it has an operating junction temperature range from -40°C to 125°C.

The MCP1824T-ADJE/OT low dropout regulator is a voltage regulator that is capable of providing a precise output voltage adjustable from 1.2V to 22V and a 1% accuracy. The output current is adjustable from 1.8A to 4A and it is designed to switch between three different output voltage configurations. In addition, the low quiescent current of 7.5uA enables the device to achieve high efficiency during operation.

The device is protected against overload and short-circuit conditions with a built-in current limiter, enabling it to safely provide power to circuits and devices. The static power dissipation is very low at 0.12W, making this low dropout regulator a suitable choice for many high-end portable applications. The MCP1824T-ADJE/OT is capable of providing very fast transient response, reducing output voltage droop during current surges in high frequency loads.

The MCP1824T-ADJE/OT application field can be found in portable applications such as cellular phones, Digital still cameras, PDAs, portable navigation systems and other mobile devices. Thanks to its high accuracy and fast transient response, it is also suitable for many high frequency applications such as DC/DC converter, line drivers and high-speed ADC drivers. This device can provide higher efficiency compared to other LDOs due to its very low power dissipation, making it a good choice for many applications.

The basic working principle of the MCP1824T-ADJE/OT is to provide a stable output voltage with a small dropout, meaning the output voltage (VOUT) will be lower than the input voltage (VIN) as the current increases. This is achieved by connecting a pass device (an NPN transistor in the case of the MCP1824T-ADJE/OT Low Dropout Regulator) between the input and output. The pass device is controlled by a feedback loop that is modulated by a voltage reference, which sets the output voltage.

The voltage reference is connected between the output voltage and a voltage divider. This voltage divider is used to set the output voltage to a certain reference voltage. When the output voltage reaches the reference voltage, the pass device is turned off and the output voltage remains stable. The voltage divider can be adjusted to change the output voltage of the regulator.

The MCP1824T-ADJE/OT can be used to provide an adjustable output voltage from 1.2V to 22V with a 1% accuracy over the entire temperature range. This low-dropout regulator is suitable for many portable applications and offers high efficiency, fast transient response and low power dissipation, making it a good choice for many applications.

The specific data is subject to PDF, and the above content is for reference