MCP3426A0T-E/MC

Number of A/D Converters:	1
Base Part Number:	MCP3426A0
Supplier Device Package:	8-DFN (2x3)
Package / Case:	8-VFDFN Exposed Pad
Operating Temperature:	-40°C ~ 125°C
Features:	PGA
Voltage - Supply, Digital:	2.7 V ~ 5.5 V
Voltage - Supply, Analog:	2.7 V ~ 5.5 V
Reference Type:	Internal
Architecture:	Sigma-Delta
Series:	--
Ratio - S/H:ADC:	--
Configuration:	MUX-PGA-ADC
Data Interface:	I²C
Input Type:	Differential
Number of Inputs:	2
Sampling Rate (Per Second):	15
Number of Bits:	16
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Data Acquisition - Analog to Digital Converters (ADC)

The MCP3426A0T-E/MC series is a high performance analog to digital converter (ADC) in a very small form factor. It is designed specifically for data acquisition applications in embedded systems, automation and test systems and is capable of converting analog signals into digital data with up to 16-bit accuracy. The MCP3426A0T-E/MC series features a low-power, low propagation delay and low latency architecture that is ideal for data acquisition applications.The MCP3426A0T-E/MC series is designed for use with a wide variety of different analog signals including voltage, current, temperature and pressure. It is also designed to interface directly with a wide range of different sensors, including thermocouples, strain gauges, and pressure transducers. This makes it an ideal choice for applications requiring sensors that require a combination of accuracy, speed, and flexibility. The MCP3426A0T-E/MC series is capable of converting analog signals to digital data with a resolution of up to 16-bit, depending on the specific model. It has a sampling rate of up to 1850 Hz and can be programmed to sample data in various configurations, including single shot, continuous and burst mode. It also has a standby mode which allows the device to be powered down while still allowing the user to program the board. The MCP3426A0T-E/MC series has a low input current consumption and requires only 1.25mA of current during conversion. This makes it well suited for battery powered devices and applications where power consumption is a critical factor. The high conversion speed and low power consumption make the MCP3426A0T-E/MC series ideal for applications requiring high speed data acquisition and low power draw.The MCP3426A0T-E/MC series supports two different types of serial interfaces, SPI and I2C, both of which can be used to communicate with the device. The SPI interface is used to configure the device and also allows for programming its various features. The I2C interface is a master-slave interface used to read and write data from the device. The MCP3426A0T-E/MC series is available in a variety of package sizes depending on the model and can be operated between a voltage range of 2.7V to 5.25V. The small footprint and low power requirements make the MCP3426A0T-E/MC series an ideal choice for applications requiring low power and small form factor devices.The MCP3426A0T-E/MC series is an ideal choice for data acquisition applications that require accuracy, speed, low power consumption and an easy-to-interface device. It is designed to be used in many different types of applications including embedded systems, automation, and test systems. It can handle a wide variety of different analog signals and has a variety of features, such as standby mode and low input current consumption, which make it well suited for use in battery powered devices. The high conversion speed and low power consumption also make it well suited for applications requiring a quick response and low power draw.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description