MCP4152-103E/P

Memory Type:	Volatile
Base Part Number:	MCP4152
Supplier Device Package:	8-PDIP
Package / Case:	8-DIP (0.300", 7.62mm)
Operating Temperature:	-40°C ~ 125°C
Resistance - Wiper (Ohms) (Typ):	75
Temperature Coefficient (Typ):	150 ppm/°C
Tolerance:	±20%
Features:	--
Voltage - Supply:	1.8 V ~ 5.5 V
Series:	--
Interface:	SPI
Resistance (Ohms):	10k
Number of Taps:	257
Number of Circuits:	1
Configuration:	Rheostat
Taper:	Linear
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

MCP4152-103E/P is a type of digital potentiometer, which belongs to digital IC. It is mainly used for electronic circuits to drive resistors and read the digital values of their resistors. Digital Potentiometers are digital components that provide varying resistances in electronic applications. The MCP4152-103E/P is a low power, high accuracy, and digital potentiometer that has a simple, user friendly, and easy-to-program interface. The MCP4152-103E/P application field is mainly used for data acquisition and analog control applications. It can be used as an adjustable resistor to adjust the voltage, current and frequency in an electronic system. The most common applications of these digital potentiometers include controlling power amplifiers, biasing circuits, voltage and frequency control, adjustable voltage and temperature-controlled circuits, controlling LCDs and other display technologies, and controlling the speed of motors.The working principle of MCP4152-103E/P is simple and straightforward. This device is a 3 terminals device which consists of an up pin, a down pin, and a wiper. The up and down pins are connected to the supply voltage and act as a high and low reference pin respectively. The wiper is connected to an adjustable voltage divider, and the midpoint of this divider is connected to the digital output. When the up or down pin is pulsed, the divider moves and provides a higher or lower voltage at the output, respectively. This voltage change is captured by an analog-to-digital converter and the relevant digital value is then read from the device.The MCP4152-103E/P also offers a SPI interface, making it easy to use in applications that require a high degree of control. The SPI bus can be used to write and read data to and from the MCP4152-103E/P device. The SPI interface allows the outputs of the device to be controlled by another microcontroller, allowing the device to be used in an embedded system. The SPI interface also allows the device to be used with a variety of other digital communications protocols.In addition, the MCP4152-103E/P also has integrated protection circuits to protect components from electrical surge and overvoltage. The protection circuit can be disabled or enabled through a digital configuration pin, so the user can easily select which protection features are required for the application.The MCP4152-103E/P also offers various features such as low power consumption, low on-resistance, flexible I2C and SPI communication, ESD protection, and adjustable resistance. Furthermore, the MCP4152-103E/P can be found in a variety of packages to suit the requirements of different applications.In conclusion, the MCP4152-103E/P digital potentiometer is a powerful, low power, and versatile device used in data acquisition and analog control applications. It offers a wide range of features such as an adjustable resistance range, versatile I2C and SPI communication, low power consumption, and adjustable protection circuit. The MCP4152-103E/P is primarily used to control voltage, current, and frequency in an electronic system. Furthermore, the device is also suitable for use in embedded systems and with a variety of digital communication protocols, making it an ideal choice for data acquisition and analog control applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description