MCP41HV31T-503E/ST

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Data Acquisition plays an important role in many digital systems, such as setting up parameters of a system or supporting the most suitable analog control to exact readings. Digital Potentiometers are an effective component choice in achieving those tasks due to their flexible nature. MCP41HV31T-503E/ST, a 3-Terminal digital potentiometer produced by Microchip, is an outstanding choice for simplifying system settings and internal component adjustment.

The MCP41HV31T-503E/ST is related to the Microchip’s 500-ohms POT family, with a wiper resistance of 100-ohms at a resolution of 256 levels. It is a 16-pin SOT-23 package that is available in a wide range of temperatures ranging from -40°C to +125°C. With regards to this, the device is an excellent choice where performance stability under harsh environments is a foremost requirement. The MCP41HV31T-503E/ST boasts of good isolation between the wiper and end terminals, since the digital words are transmitted through the use of SPI bus.

The MCP41HV31T-503E/ST operates as a programmable device, with the user able to set resistance through the writing of specific values to the incorporated EEPROM. Alternatively, the resistance may alsb be adjusted through digital commands where it was originally set to, with the common choice being 50K ohms. This allows the MCP41HV31T-503E/ST to control the exact output of the application. Connecting this device directly to the processor or logic circuit has the advantage of being able to read and write various data such as pot size, resistance and wiper settings.

The device can be used for various applications, such as LED brightness control, bridge balance, and HVAC temperature control. It may also be used to replace trimmable resistors, like those commonly found in current sense applications, such as active power supplies and over-current protection systems. This feature makes the MCP41HV31T-503E/ST an ideal device to use when controlling the voltage and current level of power stages.

The MCP41HV31T-503E/ST has a simple working principle. The wiper is linked to a series of resistors, which serve as an electrical resistance network that changes in proportion to the digital code set through the use of the SPI bus. In this particular case, the digital code is set to 8 bits, so there are 256 levels of adjustment of resistance. Depending on the hardware, the resistance can be set either manually or through digital signals under the control of the processor.

The MCP41HV31T-503E/ST is a versatile and cost-effective product, making it a good choice for a variety of applications. Its advanced features and high level of reliability make it the ideal device for controlling analog parameters. Furthermore, the product is RoHS-compliant offering a conformal coating, making it more resistant to contaminants than other similar products in the market. All these features make the MCP41HV31T-503E/ST a highly sought after product in the industry.

The specific data is subject to PDF, and the above content is for reference