MCP42100T-E/SL

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Data Acquisition - Digital Potentiometers includes devices that provide easily adjustable, precise resistive networks with, or without, on-chip memory. The key component of a digital potentiometer is the resistor network, which consists of a number of resistors connected between a common terminal and ground. The wiper terminal is the terminal that is connected to the resistor array, and can be moved from one end of the resistor array to the other. The position of the wiper terminal is determined by a digital word from the device memory, typically an 8/10 bit word.

The MCP42100T-E/SL is a Digital Potentiometer. It is a voltage output Digital Potentiometer that is integrated into a MCP42100T-E/SL 8 pinSOIC and 8 pin MLP packages. The chip includes a potentiometer and an output buffer, with the output voltage linearly following the wiper movement. The device is optimized for extremely low current operation and offers a wide range of features. The MCP42100T-E/SL is ideal for applications that require a low cost and high quality Digital Potentiometer.

The MCP42100T-E/SL is a single-channel device. It has a wide resistance range that covers a range of 100k to 900k??‹. The output of the device is a "floating" voltage that is proportional to the wiper setting. The output voltage is adjustable from 0V to the reference voltage (Vcc).

The MCP42100T-E/SL has an operating temperature range of -40°C to +85°C and operates on a 1.8V to 5.5V. The device has a high accuracy of ±1.0%. It is a low-power device, with a typical current of 45 μA, and a maximum current of 250 μA.

The device provides a high level of control over the resistance, allowing for precise tuning of resistance values. It has an integrated positive slew rate limit of 2V/μs, which provides users with improved stability and repeatability. The device has a maximum readback voltage of Vcc/2, which prevents the output from going into saturation.

The MCP42100T-E/SL features a power-on reset capability. When the power is applied, the device is reset and the wiper position is set to the middle of the array. This ensures maximum protection against a sudden power cycle and possible damage to the array due to out-of-range wiper position.

In addition to the power-on reset feature, the MCP42100T-E/SL includes a serial interface that allows the user to program the device. The chip includes an SPI interface which allows the user to transfer the data to and from the device. The on-chip memory allows the user to store up to 256 wiper settings, which are accessible via the SPI interface. The chip also includes a write protect bit that helps protect the stored data from accidental damage or tampering.

The MCP42100T-E/SL is designed for easy integration into many applications. It is ideally suited for circuit board size reduction and also for applications that require low voltage operation. The device is also suitable for analog applications such as gain adjustment, frequency tuning and digital control applications. In addition, the MCP42100T-E/SL is well suited for both industrial and consumer applications.

In summary, the MCP42100T-E/SL is a versatile Digital Potentiometer that offers a wide range of features for applications that require precise resistance control with low power consumption and a wide range of resistance values. It has on-chip memory for storing up to 256 wiper settings, SPI interface for programming the device, a positive slew rate limit of 2V/μs, and a maximum readback voltage of Vcc/2. Above all, its easy integration into many applications make it a popular choice for circuit board size reduction, analog applications, and digital control applications.

The specific data is subject to PDF, and the above content is for reference