MCP4432-103E/ST

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Data Acquisition refers to the process of tracking, measuring, and recording the performance of various devices and components, commonly used in industrial automation systems. One type of data acquisition technology is the use of digital potentiometers, or Digital Micro Potentiometers. Digital Micro Potentiometers are special types of integrated circuits that utilize electrical resistances to offer a wide range of adjustable resistance settings. The MCP4432-103E/ST is a Digital Micro Potentiometer specifically designed to be used in data acquisition applications.

The MCP4432-103E/ST is an 8-bit device consisting of an on-board 2Kohm or 8Kohm resistance divider. This device is capable of delivering an adjustable electrical resistance, commonly referred to as a ‘wiper position’, which can be used to track and measure the performance of various components and devices. The MCP4432-103E/ST is extremely versatile and offers a range of performance enhancing options, including a wide operating range (up to 25 VDC), and a wide temperature range (from -2°C to +85°C).

The MCP4432-103E/ST is capable of delivering high accuracy, low noise and low temperature drift for digital data acquisition applications. Thanks to its potentiometer overdrive protection and linear overload detection, it can effectively protect itself against any inadvertent overloads.

In terms of physical layout, the MCP4432-103E/ST has four pins representing the two resistor points (R1 and R2), the wiper, and the supply ground potential. To drive the resistance divider, the device uses two common logic supplies (VCC1 and VCC2). On the logic side, the device is driven by two registers, RDAC (Read Digital-to-Analog Converter) and WR (Write Bit).

The MCP4432-103E/ST works by taking the voltage difference between R1 and R2 as input and producing an adjustable output voltage at the wiper. The RDAC register controls the output voltage value and determines the wiper position. By setting RDAC according to the desired wiper position, the device adjusts the resistance setting between R1 and R2 to achieve the required output voltage. The WR Bit is used to enable the RDAC register and enable the adjustment of the output voltage.

Furthermore, the MCP4432-103E/ST has a very low stand-by current draw to conserve energy. Additionally, the device is rated for a wide range of applications and is able to operate in temperatures between -2°C and +85°C.

MCP4432-103E/ST is a reliable, user-friendly and highly accurate digital micro potentiometer. This device offers an adjustable resistance setting, making it an ideal choice for use in data acquisition applications. Its low stand-by current draw and wide temperature range make it suitable for a wide range of environments. The device is relatively simple to operate, making it an economical choice for those looking to monitor and track the performance of a variety of components.

The specific data is subject to PDF, and the above content is for reference