MCP6144-E/ST

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The MCP6144-E/ST is an instrumentation amplifier and buffer amplifier. It is an integrated buffer amplifier designed to provide a low noise, low distortion, low-power, and high precision amplification solution. It can be used in a wide variety of industry applications, including linear-amplification, instrumentation, and other low-level signal processing.

Application Field

The MCP6144-E/ST is an ideal devices for linear-amplification, instrumentation, and other low-level signal processing applications. It can be used for audio-frequency preamplifiers, current amplifiers, level shifter, slew-rate control, and instrumentation amplifier. It is ideal for applications where a low-noise, low-power, and low-distortion amplification of signals is required in order for to obtain an optimum set-up over a high dynamic range and large voltage range.

Working Principle

The MCP6144-E/ST consists of an operational amplifier connected to three feedback resistors. The gain is determined by the ratio of the input resistors, R1 and R2, and the feedback resistors, R3 and R4. The input signal is amplified by the operational amplifier and sent to the output through the feedback resistors. The internal structure of the device ensures that the output voltage will be equal to the input voltage, plus or minus a fixed gain determined by the resistor values.

The device can provide single ended outputs up to 36 volts peak-to-peak. The input common-mode voltage range is also adjustable with an external resistor, allowing a wide range of applications. The MCP6144-E/ST uses a low noise figure of just 0.5µV/V-Hz, making it ideal for low-noise applications. Its low-power consumption (3mA typical, 5mA maximum) also makes it a great choice for battery applications. The MCP6144-E/ST is available in SOIC-14, TO-99, and TSSOP-14 packages.

Conclusion

The MCP6144-E/ST is an ideal low-noise, low-power, low-distortion buffer amplifier suitable for a wide range of linear-amplification, instrumentation, and other low-level signal processing applications. It can provide single-ended outputs up to 36 volts peak-to-peak, and its adjustable input common-mode range allows for versatile application. Its low noise figure, low power consumption, and small package size make it an ideal choice for many applications.

The specific data is subject to PDF, and the above content is for reference